Waterproof Terminal Box for Rear lighting Connectors

[Gyrojon]

Hi there has anyone discovered or fabricated a neatand waterproof juction box to connect the rear lights indicators etc in the rear chassis of your Lightweight. Mine has the usuall bullet connectors and then wrapped round with yeards of gaffer tape/PVC tape to keep the connections dry. There seem to be varioss connector boxes around from the usual suspects and I would like to make a half decent if not historrically correct, waterproof set up for our Landy. Any suggestions would be gratefully received
Thanks

[AR4412]

If you haven't done so already, have a search for waterproof trailer junction boxes, and hopefully you will find something to suit your needs.

Regards,

[Gyrojon]

Many thanks Neil, we thought this was probably the best route to go and I wanted to keep those electrics nice and dry.
Cheers
John

[simonm]

I use the rubber bullet connectors, you can get from classic auto Elec suppliers, they are in keeping and use brass bullets which if you solder are pretty reliable.
you can also get cloth sticky tape which is much nicer than PVC

All the Best Simon