Page 1 of 1
Voltage
Posted: Tue Sep 12, 2023 2:26 pm
by martinN
I have a series 2A lightweight 12v. The vehicle does have a voltmeter. The scale is 3 - 17 volts, when driving recently the volt meter shows 16 volts. Top of the scale in red. Is this voltage correct?
If to high how do I rectify.
Re: Voltage
Posted: Tue Sep 12, 2023 4:36 pm
by diffwhine
Does it still have voltage regulator or has the dynamo been ditched in favour of an alternator?
If it has a dynamo, it sounds like your voltage regulator is playing up. Details on how to adjust this are in the workshop manual.
Re: Voltage
Posted: Tue Sep 12, 2023 5:19 pm
by martinN
Still got voltage regulator/ dynamo.
Re: Voltage
Posted: Tue Sep 12, 2023 11:16 pm
by diffwhine
Then it can really only be the regulator. I can't remember the figures offhand, but the standard regulator is set to charge old style batteries up to about 15V - that's too high for a modern battery. If you have a modern battery, the regulator needs to be adjusted to a max of something like 13.5 Volts.
Clive Elliott is the guru on things electrical - he may be able to advise you better.
The details on how to set up a voltage regulator are available online and also in he workshop manual. If your battery has been overcharged for some time, you may want to consider replacing the battery as well.
Re: Voltage
Posted: Fri Sep 15, 2023 10:07 am
by fv1620
First check that this high voltage can be verified independently with a known reliable voltmeter measuring directly on the battery.
Re: Voltage
Posted: Fri Sep 15, 2023 5:06 pm
by fv1620
If the voltmeter is correct then check the regulators are free to move and that the contact points are not pitted. If they need gentle abrasion make sure you blow/wash the dust clear.
The gaps, spring tensions, pull in & drop out voltage is covered in EMER POWER O118.
There is some coverage in a mish-mash of Rover documents covering S1 & S2 bundled together in EMER WHEELED VEHICLES Q022. Very chaotic collection that defies the normal EMER structure with vehicle charging and starting normally accommodated in POWER.