Electrical Coolant and Oil Temp Guages

If you have encountered or solved a problem post here
Post Reply
AlbertaBoy
Posts: 30
Joined: Tue Jul 12, 2022 5:42 am

Electrical Coolant and Oil Temp Guages

Post by AlbertaBoy » Wed May 17, 2023 4:51 pm

Can you get electrical replacements for the Capillary gauges that don’t cost silly money, or am I in the wrong game rebuilding my “Triggers Broom” Lightweight

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Electrical Coolant and Oil Temp Guages

Post by AR4412 » Wed May 17, 2023 8:08 pm

You can replace the capillary gauge combined cluster with the later electrical combined gauge, in fact IIRC there was a complete conversion kit to do so, but it is a fairly straight forward DIY job. You will need a pair of temperature sensors, (IIRC the coolant and oil ones are the same), and you will need an adaptor for the temperature sender to fit the cylinder head, and one to fit the thermo pocket. The adaptors are the standard ones for an electrical temperature sender on the 2 1/4 petrol. You will need to run a piggy back twin wire to feed to the gauges from the fuel gauge's original ignition feed Green wire, and then run a wire from each gauge to the appropriate sender.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

AlbertaBoy
Posts: 30
Joined: Tue Jul 12, 2022 5:42 am

Re: Electrical Coolant and Oil Temp Guages

Post by AlbertaBoy » Wed May 17, 2023 10:07 pm

Thanks - best place to buy them/ part numbers?

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Electrical Coolant and Oil Temp Guages

Post by AR4412 » Thu May 18, 2023 8:06 am

The senders are Part No. 560794, the adaptors are Part No. 568457, unless you have a later metric head fitted then it is ERC8973 to fit the coolant sender. These should be widely available, but haven't had chance to look. The combined cluster is Part No. PRC1776 for a 12 volt vehicle, PRC1777 for the 24 volt vehicle. Again, available, but I would suggest sitting down before checking the prices for a new unit.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

AlbertaBoy
Posts: 30
Joined: Tue Jul 12, 2022 5:42 am

Re: Electrical Coolant and Oil Temp Guages

Post by AlbertaBoy » Thu May 18, 2023 3:36 pm

Many thanks

Post Reply