Page 1 of 2

DIY Tools. Who has the best to share!?

Posted: Tue Jun 09, 2020 7:33 pm
by weetchus
Hi all. Thought I'd post the question:

WHO HAS COME UP WITH THE MOST INGENIOUS DIY TOOL ON THE GROUP?

I saw this video of this amazing DIY valve spring compression tool and thought... what else has been done?
https://youtu.be/cpLkEYGQbS0?t=302

My own poor contributions are this box spanner below for the wheel hubs and my method for getting the gearbox bellhousing and flywheel separated from each other (haha).
I'm thinking ideas for: Valve Guide Extractors, Valve insert driving methods and tools, bearing drifts... the list goes on.
Screen Shot 2020-06-09 at 2.29.53 pm.png
Screen Shot 2020-06-09 at 2.29.53 pm.png (1.16 MiB) Viewed 10077 times
Screen Shot 2020-06-09 at 2.32.16 pm.png
Screen Shot 2020-06-09 at 2.32.16 pm.png (2.8 MiB) Viewed 10077 times

Re: DIY Tools. Who has the best to share!?

Posted: Tue Jun 09, 2020 8:19 pm
by removeduser185
Not ingenious as it is merely a home-made version of a Land Rover tool, but it's my contribution to this thread. It's a device for compressing the spring in a steering relay in order to get the bushes on.
rebuilt steering relay 1.JPG
rebuilt steering relay 1.JPG (1.17 MiB) Viewed 10068 times

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 12:43 am
by weetchus
Hey Fred. I forgot that you inspired me to make one of these when I was doing my relay. Prob my first welding job... and you can tell.
Screen Shot 2020-06-09 at 7.43.12 pm.png
Screen Shot 2020-06-09 at 7.43.12 pm.png (761.25 KiB) Viewed 10055 times
Fred wrote: ↑
Tue Jun 09, 2020 8:19 pm
Not ingenious as it is merely a home-made version of a Land Rover tool, but it's my contribution to this thread. It's a device for compressing the spring in a steering relay in order to get the bushes on.

rebuilt steering relay 1.JPG

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 10:53 am
by longlegslandyman
Have made many over the years and for differnt cars too .
This is a simple one made to hold the diff flange so I could remove the diff nut.

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 10:59 am
by longlegslandyman
Here,s another needed to hold the crankshaft pulley on a 200tdi so I could remove the nut to do a timing belt and water pump change.

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 12:06 pm
by longlegslandyman
This one was for the overhaul of the steering relay ,holds the spring compressed with the help of a couple of zip ties to hold them together ,so you can slide the shaft in and fit the cone bushes before you slide the lot in the housing.

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 6:03 pm
by weetchus
Some great shares. Thank you. Keep em coming!

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 6:47 pm
by longlegslandyman
Here,s another one not used for a lightweight unless like me your using a lt230 transfer box and I was too tight to stump up for the correct socket.

Re: DIY Tools. Who has the best to share!?

Posted: Wed Jun 10, 2020 7:07 pm
by Ridgy
Some great ideas! Moral of the story seems to be.......never throw away your bits of scrap metal - they'll come in handy one day!

Re: DIY Tools. Who has the best to share!?

Posted: Thu Jun 11, 2020 7:34 pm
by weetchus
Let the hoarding continue.
We all have the Land Rover disease.

Ridgy wrote: ↑
Wed Jun 10, 2020 7:07 pm
Some great ideas! Moral of the story seems to be.......never throw away your bits of scrap metal - they'll come in handy one day!