Page 1 of 2

Late S3 Seat Support Brackets. (2 pr)

Posted: Thu Apr 30, 2020 8:30 pm
by MG Mal
As shown in picture below.

I need two pairs for my late 1980 GS.

I've been to all the usual suppliers, and even Blanchards can't help this time! :shock:

https://forum.militarylightweight.co.uk ... p?id=20421

Thanks in advance.

Mal.

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sat May 02, 2020 7:05 pm
by AR4412
Hi Mal,

Armed with the numbers, I did a quick check on Friday afternoon at work.

MRC3474, the retaining plates for the rear of the seatbase cushions are, believe it or not, stocked by Britpart, and will cost about £3.00 each. Give or take whatever the retailer puts on top of his trade price. They should be available from your local independant with a Britpart account.

MRC6394 and MRC6395 are shown as being good numbers on the Britpart system, but come up as 'Notify When In Stock' if you try to order them. This means that they will try to order the part from JLR, and will let you know if they are available or not once they get their reply from JLR.

I haven't been able to check for the parts with our local JLR dealership because JLR is run by accountants and have therefore shut, so that the government have to pay their staff wages. Eh-hem. I mean our local JLR dealership is currently shut in the interests of the health and wellbeing of their staff and customers.

It might be worth ringing/checking the websites of local JLR parts dealerships near you, to see if they are open, and are able to source the angle brackets.

Regards,

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sat May 02, 2020 7:15 pm
by MG Mal
Sounds good, Thanks.

I used to find stuff like this on "X-Part!" world data base, but am now locked out.
(Seems new owners don't want independents accessing the availability listings!)

However "Nato Parts" in France, seem to have the part no. as current, so have emailed them. (Worth a try)

Nick Blanchard says he has the rear tabs, but although cheap to make, not enough "Take up" to remake the side brackets.

Regards,

Mal.

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sat May 02, 2020 8:19 pm
by AR4412
Found the rear locators after my reply to your post.

https://pablanchard.co.uk/index.php?rou ... rch=000003

My boss needs all four of the side brackets for his 1980 FFR, I needed some, you need some, and I bet others do too. I'm sure the market is there, especially via waltbay.

Regards,

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sat May 02, 2020 8:41 pm
by MG Mal
AR4412 wrote: ↑
Sat May 02, 2020 8:19 pm
Found the rear locators after my reply to your post.

https://pablanchard.co.uk/index.php?rou ... rch=000003

My boss needs all four of the side brackets for his 1980 FFR, I needed some, you need some, and I bet others do too. I'm sure the market is there, especially via waltbay.

Regards,
Apparently Nick Blanchard thinks not.
Maybe if there are sufficient enquiries put to Blanchards they "May" consider getting some made.

However, how much he would charge for them is another headache. ;)

Regards,

Mal.

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sat May 02, 2020 8:52 pm
by elm_supply
let me have a look at my lightweights tomorrow, they look simple enough to make so maybe i could knock up 10 pairs and see what happens

Phil

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sat May 02, 2020 10:08 pm
by MG Mal
elm_supply wrote: ↑
Sat May 02, 2020 8:52 pm
let me have a look at my lightweights tomorrow, they look simple enough to make so maybe i could knock up 10 pairs and see what happens

Phil
That's very good of you Phil.

'm sure ten pairs would sell quickly enough, as you need two pairs per LWT.


Regards,

Mal.

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sun May 03, 2020 8:10 am
by Ridgy
Ditto. I don't have the right set-up on mine either and have the seat based wedged in with wooden battens :oops: . Have been following this thread with interest.

Keep us posted Phil!

Cheers

Steve

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Sun May 03, 2020 10:15 pm
by elm_supply
ive had a look at both my lightweghts this afternoon and neither of them use brackets like that for the seats :(

so is there anyone in the cheshire area who does have them, or would anyone be willing to lend me a pair to draw? ill pay postage both ways

Phil

Re: Late S3 Seat Support Brackets. (2 pr)

Posted: Wed May 06, 2020 7:06 pm
by AR4412
Hi Phil,

If no-one else nearer comes forwards, I'll take one for the team and send you my one for you to work off of. I will need to locate it, as it is stored away in a box with other random Lightweight bits and pieces.

Regards,