Page 1 of 2

IR receiving set

Posted: Thu Jan 03, 2019 7:41 pm
by 55hg89
Right then pick a couple of these up today, don’t know a lot about them so can anyone enlighten me please. Jim .

Re: IR receiving set

Posted: Thu Jan 03, 2019 9:08 pm
by fv1620
Do they have the cold cathode image converter tubes inside?

There is some coverage at the end of article No.3

http://hmvf.co.uk/topic/20066-tabby-tal ... ision-1-4/

Re: IR receiving set

Posted: Thu Jan 03, 2019 9:25 pm
by 55hg89
Hi Clive, I don’t know, how can you tell ? Your link doesn’t work, sorry . Jim .

Re: IR receiving set

Posted: Thu Jan 03, 2019 9:28 pm
by 55hg89
Hi Clive , disregard what I just posted , I’ve managed to sign in now , so will have a read . Thanks Jim

Re: IR receiving set

Posted: Thu Jan 03, 2019 11:15 pm
by fv1620
It used to be an open resource but after a number changes to the site unfortunately it was changed to a log in only. You might find the other articles of interest to see what other countries were up to in the story of IR. I was looking on a WW2 web site & see that someone accused me of copying some of it from an article that appeared in the now defunct Wheels & Tracks :mrgreen:

Re: IR receiving set

Posted: Fri Jan 04, 2019 4:19 pm
by 55hg89
Hi Clive, one set has the converters in the other not . Haven’t tried to test them yet , but will have ago later . Jim .

Re: IR receiving set

Posted: Fri Jan 04, 2019 8:37 pm
by fv1620
Don't know what you paid for them but just to put them in perspective. I first started seeing these on the surplus market circa 1972 they were up to £100 but with no tubes! I think the few with tubes were £125. That was quite a lot of money in those days.

In the late 1950s Tabby Type E with PSU & fixing kit was about £12, which I could never afford with a pocket money of 2/6 a week. All I could afford was a single image converter tube for 5/- but at the time had no idea how to make use of it!

Re: IR receiving set

Posted: Sat Jan 05, 2019 8:53 am
by 55hg89
Hi Clive, thanks for the information, they weren’t a lot of money, £50 a set so I thought they would be worth a punt . Didn’t matter if the converters were in them , just a nice piece of British Army equipment to go with the airportable . Cheers Jim .

Re: IR receiving set

Posted: Sat Jan 05, 2019 10:31 am
by fv1620
I even did IR green-laning in my first LtWt, that was very scary. It was very tunnel visioned not just due to the optics of the receiver (I was using Tabby Type E) but the narrowness of the headlight beam, there wasn't a lot of lateral scatter as you need a lot of energy to punch through the filter to get IR out.

WW2 filters were flat filters but to address the beam narrowness there was an add-on plastic diffuser to get a better spread of IR from the dedicated IR headlights. I wasn't aware of any post-war add-on diffuser, the original post-war filters were flat & suffered from this narrowness & surface shininess. To address this, the later type had domed filters that not only diffused the IR beam better but had a non-shiny surface. (Others may dispute this)

Whatever type of filter I used there was never enough lateral illumination, very important if you are off-roading. The IR receivers didn't help for lateral vision. Interestingly in the 1930s the German military were contemptuous of IR systems & rejected their use as they argued that if a vehicle was to be fitted with binoculars they should also work in daylight. Showing a complete misunderstanding of the requirements for IR night driving (close vision) & binoculars for daylight use (distant vision). On the British side in the Summer 1943 some IR trials GOC & 43 Div were contemptuous of Tabby in its original form & seem to have lost patience with it. Meanwhile the Germans had become highly advanced with IR systems especially for night fighting rather than the Allied quest for principally night driving.

With old (non-image intensified) systems a different mindset is needed not just the limitations of the optics but appreciating that you are not using a magic viewer expecting to see a daylight version of scenery but tinged with green light. It is not like that, green appears dark, red/purple bright & even cats eyes (pussy cat, not road reflectors) are black.

PS Meant to say never look close up into an IR filter to see if it is on. You won't see the IR energy but it is there & the IR power will be dissipated in your eyeball. If you haven't got IR viewers & not sure if the IR source is on then put your hand in front & you will feel the warmth. The other thing is don't waste time shining a LED torch through an IR filter because the bandwidth of the LED is quite narrow & is designed to produce only visible light, there is no point wasting energy into the IR spectrum. On the other hand there are dedicated IR LED torches that have no visible light energy & it is impossible to see if they are on unless you have an IR viewer. You won't feel the warmth as LEDs are very efficient. I have an IR rifle sight & often find the IR LED torch has gone flat because I left it on. Never stare down into the IR LED to see if it is one as you won't see it & if it is on that IR energy is going into the eyeball.

Re: IR receiving set

Posted: Sat Jan 05, 2019 10:32 am
by Jiml
£50 a set, you just gave Sid a heart attack.