Reborn 27GJ77

Tell us about any of your Land Rover related projects here.
Post Reply
User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Reborn 27GJ77

Post by Loulou » Thu Jul 05, 2018 2:23 pm

Hello,

Google translation is my best friend right now!

Actually 27G?77, because the VIN plate is damaged at this point and is therefore illegible.

This LWT FFR LHD comes from BAOR, is dated January 1977 and the contract number is: WV 11916.
It works very well since I traveled more than 600 km to 60 km / h average to go home with :D X! . But well ... not quiet anyway, a lot of elements are either very worn, or completely rotten.

At the beginning of 20017, I performed a complete disassembly by subassemblies to estimate the work; I decided to buy a new chassis (Richard Galv), the number of elements completely rotted by rust was too important.
It's an investment, a good starting point and I'll save time later.

Loulou was reconditioned in the BAOR workshops in 1986, the plates on the engine and the gearbox give good indications. The engine is in standard sized bore, the crankshaft is +0.10, the cylinder-head must be a "pre-Defender" lead-free but to check, the gearbox also works properly.

The lower part of the bulkhead (footwell?) Is damaged (it is traditional) and the vent-panel is not too pierced by rust. The seat-base is broken.

Since its acquisition in September 2014, I have regularly purchased quality spare parts (NOS + genuine + OEM) to spread the reconstruction costs as well as all the useful technical document and follow-up of the reconstructions of LWT on various forums. I think it is the best solution to finish this type of work very long.
I take this opportunity to thank you for all the tips and tricks available on your forum.

Since the fall of 2017, the entire transmission has been rebuilt: the front and rear axles and the two driveshafts. NTN bearings (fine adjustments to the comparator) TRW-Lucas and Mintex brake cylinders for linings, Corteco oil seal and new flange, brake drums are rectified, etc.
The most difficult was the front deck with new bowls and the mounting of the Railko to the press.
All seals on the gearbox have been changed, to repair the "output flanges", I will surely use SKF speedi-sleeve.

For the sunny season of this year (painting in the rain ...?), I'm going to work on the bodywork because there is a lot of work also to remake a lot of things correctly, straight, without oxidation of aluminum and without bumps.
The engine will be measured and rebuilt next winter.

In the end, Loulou will be repainted in deep bronze green satin (paint + hardener to mix) with a new FFR tarpaulin and the markings of "1st Armored Division" or "12th Armored Infantry Brigade", we will see well at this time.

I will put pictures of the progress of the site regularly (well, I hope I have the time ... :mrgreen: )

1-LRLW-Forum-small.jpg
1-LRLW-Forum-small.jpg (103.3 KiB) Viewed 13398 times
3-LRLW-Forum-small.jpg
3-LRLW-Forum-small.jpg (100.75 KiB) Viewed 13398 times
5-LRLW-Forum-small.jpg
5-LRLW-Forum-small.jpg (87.34 KiB) Viewed 13398 times
7-LRLW-Forum-small.jpg
7-LRLW-Forum-small.jpg (173.54 KiB) Viewed 13398 times

Thank you for your interest in this reconstruction.
Loulou.
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
landymad
Admin
Posts: 3979
Joined: Wed Jan 13, 2010 8:42 am
Location: Doncaster

Re: Reborn 27G?77

Post by landymad » Thu Jul 05, 2018 2:33 pm

If you PM me your chassis number i may be able to assist with you military reg.

Si vous me donnez votre numéro de châssis, je pourrai vous aider avec le reg.
Rob.
Chairman and Webmaster.

1972 Series III Lightweight GS 200Tdi
----------------------------------------------------------

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Reborn 27G?77

Post by Loulou » Thu Jul 05, 2018 3:14 pm

Tank you very much Landymad for you hep.

I send an InMail.

Regards.
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Reborn 27GJ77

Post by Loulou » Mon Jul 09, 2018 12:55 pm

Sirs,

Some news from the country of frog eaters

Military registration for Loulou is 27GJ77

Here are the 2 axles ready to be reassembled.
They will be assembled with new leaf springs bent to heat in Belgium by a craftsman. Springs more flexible than the original "Rover Bramber / military HD" for my old lumbar vertebrae ...
Missing only the marking "OEP-220"
Axles full rebuilt-small.JPG
Axles full rebuilt-small.JPG (150.93 KiB) Viewed 13361 times
The gearbox-transfer.
All black metal parts have been repainted.
I did not want to paint the aluminum in light gray metallic; first it does not hold on and it's too much ...
The handbrake mechanism is completely overhauled and reassembled with new springs and friction pads; UNF and BSP new fasteners.
BV-BT rebuilt-small.JPG
BV-BT rebuilt-small.JPG (167.4 KiB) Viewed 13361 times
Your obliged to work (My name is Bond, James Bond ...) :mrgreen:
James Bond-small.JPG
James Bond-small.JPG (144.33 KiB) Viewed 13361 times
Best regards.
Loulou.
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
Bob Fell
Cake Guru
Posts: 3044
Joined: Wed Sep 18, 2013 7:17 am
Location: Melton Mowbray

Re: Reborn 27G?77

Post by Bob Fell » Mon Jul 09, 2018 8:15 pm

Greetings from Angleterre,
Your workmanship is superb, keep the pics coming, it's lovely to see the dedication in the restoration of another of these vehicles so symbolic of the British military Land Rover, along with what Fred and Richard just to name a few, have achieved.
Regards
Bob
042Bobf


19HF27 Lightweight FFR ex Gurkha Field Force HQ, various Gurkha Sigs Tps and Comp Ord Depot Hong Kong 1980-1997.
42ET39 Narrow Track Sankey ex BAOR 22 & 7 Sig Regts, 16/5 Lancers, 2 RTR, 9/12 Lancers & QDG 1969-2001.

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Reborn 27G?77

Post by Loulou » Mon Jul 30, 2018 12:14 pm

Work in progress for half-rotten bulkhead.
LHD bulkhead.png
LHD bulkhead.png (382.43 KiB) Viewed 13299 times
and…
RHD bulkhead.png
RHD bulkhead.png (375.01 KiB) Viewed 13299 times

I wish you a beautiful summer vacation.

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Reborn 27G?77

Post by Loulou » Mon Sep 24, 2018 7:28 am

Hi Gentlemans,

Please find enclosed 2 pictures oh refresh CAV starter motor.
Full cleaned and desoxided, check brush (1/3 used) and rotor.
Some light grease to end of axle and… princess fingers to go up the f ... brush!

Please : do you know the size of nuts + and - . I cannot find it : UNF ? UNC ? or BSF ?

Have a nice week.
6-StarMot-Rebuilt-small.JPG
6-StarMot-Rebuilt-small.JPG (79.2 KiB) Viewed 13203 times
7-StarMot-Rebuilt-small.JPG
7-StarMot-Rebuilt-small.JPG (96.3 KiB) Viewed 13203 times
Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Reborn 27G?77

Post by andrewjsimpson1977 » Mon Sep 24, 2018 9:26 am

Merci bien pour les photos Loulou.

Lovely work, it like an assembly line!

As much as I wanted to get whole subassemblies ready for the main build (as you have done so well here) I always ended up doing things piecemeal in the end. Hats off to your professional approach - this is going to be a spotless vehicle by the looks of it.

Continuez votre bon travail,

Best regards,

Andy

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Reborn 27G?77

Post by Loulou » Mon Sep 24, 2018 10:57 am

Thank you for this pleasant appreciation.

Indeed, I think it is necessary to progress with subsets, but it is the theory and in a few weeks it may be a big mess!

I also believe that we must not be drowned by the yard and especially keep a pleasure to work, but all is not easy.

Greetings

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Reborn 27GJ77

Post by Loulou » Mon Feb 25, 2019 9:00 am

Hello Gentlemans,

Some news of the progress of the work.
It has been quite cold lately and the workshop is wet and unheated, so it is not always possible to work under "acceptable" conditions and the products used do not always respond satisfactorily to the low temperatures ... nor do I 'elsewhere…

In the meantime I started to disassemble the tub: a lot of work to straighten the flat parts, replace some damaged pop rivets and deoxidize the areas of the mooring hooks and 335832 "tread plate rear floor".
All of the other elements (330265 crossmember) were steel sand-blast and repainted in black in the fall of 2018.
Total stripping and a good coat of polyurethane primer are expected in the spring.
Tub+blackson-out-BD.png
Tub+blackson-out-BD.png (1.96 MiB) Viewed 12939 times
The bulkhead will be finished soon also:
Most of the holes and the cutting of replacement sheet were welded in the fall of 2018. As soon as the temperature will be more lenient, I can also have a good coat of polyurethane primer with beforehand, polyurethane putty in the folds and sheet metal return; In short ... a lot of time to spend again.
Bulkhead+Mastic-1-BD.png
Bulkhead+Mastic-1-BD.png (2.03 MiB) Viewed 12939 times
 It's a big job and I still have to go out 336738 tie bolt 1/2unf which is rusty and completely stuck in the vertical support ...
Bulkhead+Mastic-2-BD.png
Bulkhead+Mastic-2-BD.png (788.28 KiB) Viewed 12939 times
After, it will be working on the engine as soon as the beautiful days are there.

I wish you a good week and good luck to all those who scratch, sand, and tease their LRLWs.

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

Post Reply