Page 1 of 1
Drop down rear number plate
Posted: Thu Feb 22, 2018 7:58 pm
by Landie68
Does anyone know where it is possible to get hold of drawings or dimensions for a drop down number plate? What with several bits of old panels, I am thinking of making a rear drop down number plate holder, so any pointers as to what is needed will be great.
Re: Drop down rear number plate
Posted: Thu Feb 22, 2018 8:05 pm
by AR4412
Will this do mate?

- Number Plate Holder.jpg (71.21 KiB) Viewed 1102 times
Regards,
Re: Drop down rear number plate
Posted: Thu Feb 22, 2018 8:24 pm
by Landie68
As always Neil, a fountain of knowledge, thanks mate. I will see what sort of a hash up I can make of making 1
Re: Drop down rear number plate
Posted: Thu Feb 22, 2018 9:23 pm
by removeduser185
You can get the hinge pins - they're the same as the vent pins, 334121 and also the vent hinges themselves - 330060 and 330061. You also need the number plate clip and its socket - both available 346139 and 346140. The number plate light is easily available.
I can let you have a couple of the correct waterproof bullets and sleeve for the lead. Of course, you can also buy the whole thing from Blanchards for around £40 - 346040.
You can see mine with the bullet connectors and sleeve fitted here - attached to the left hand cross-member to tub bracket using a P clip to hold the sleeve in place to the right hand of the two securing bolts - I know it isn't a great picture, but its the only one I have:

- rear view of tub 27 Oct 17.JPG (1.21 MiB) Viewed 1087 times
Fred