Page 1 of 7

TUB CROSS MEMBERS

Posted: Wed Nov 01, 2017 4:45 pm
by BOMBER71
Sorry for the delay but waiting for my local fabricators to come back with a price . They will do a batch of 20 for £20 each so I will go ahead and order 20 . Probably be ready in two weeks . Let me know who is interested . Cheers Martin

Re: TUB CROSS MEMBERS

Posted: Wed Nov 01, 2017 9:21 pm
by Landie68
Hi Martin

I am also exploring the possibility of getting them made up, but I very much doubt my guy will come up with such a good price. I will know more next week, so unless he can match your source, I will duck out.

On a more positive note, I spoke with Bits4landies today, and they have acquired a lightweight and intend stripping it down to see what they can make for the lightweight market.

Re: TUB CROSS MEMBERS

Posted: Wed Nov 01, 2017 9:34 pm
by Grapelli746
Hi Martin,

I assume that you are referring to the aluminium front of tub cross member that resides at the base of the seat bulkhead and is mounted to the chassis outriggers and the seat belt mountings, rather than the steel under tub floor bracing members. If so, they are an excellent price - very well done!

Please may I have 2 of them? If demand outstrips your supply, I would be very content with just one so that another member could also benefit.

Re: TUB CROSS MEMBERS

Posted: Wed Nov 01, 2017 10:33 pm
by njc21
Hi Martin,

I’d like one please. Let me know if you need any payments up front and I’ll arrange to get it to you.

Many thanks for going to the trouble of arranging this.

Regards,

Neil

Re: TUB CROSS MEMBERS

Posted: Wed Nov 01, 2017 11:48 pm
by BOMBER71
Grapelli746 wrote: ↑
Wed Nov 01, 2017 9:34 pm
Hi Martin,

I assume that you are referring to the aluminium front of tub cross member that resides at the base of the seat bulkhead and is mounted to the chassis outriggers and the seat belt mountings, rather than the steel under tub floor bracing members. If so, they are an excellent price - very well done!

Please may I have 2 of them? If demand outstrips your supply, I would be very content with just one so that another member could also benefit.
Yes Steve its the Aluminium cross member the same as the one i changed in my
rebuild thread before photobucket removed the pictures . When i enquired about only having one done the price was £58 plus vat which was what i paid two years ago .By ordering 20 it brought the price right down and i figured that if i could not shift most of them on here i could easily sell them for more on the bay of evil . Will try and find and reload the pictures from my tub rebuild. Cheers Martin

Re: TUB CROSS MEMBERS

Posted: Thu Nov 02, 2017 7:38 am
by Trickyh
Hi Martin

Good work !

Definitely put me down for one please

Rich

Re: TUB CROSS MEMBERS

Posted: Thu Nov 02, 2017 4:40 pm
by MickB
I'll take one please :!

Mick.

Re: TUB CROSS MEMBERS

Posted: Thu Nov 02, 2017 7:35 pm
by BOMBER71

Re: TUB CROSS MEMBERS

Posted: Thu Nov 02, 2017 8:22 pm
by Landie68
Those with a Series 3 need to remember that you will need holes for the seatbelt mountings.

Re: TUB CROSS MEMBERS

Posted: Sun Nov 05, 2017 5:59 pm
by BOMBER71
Orders so far . Steve (Grapelli) x 2 . Neil (njc21). Rich ( Trickyn) Mick B and I will probably keep a couple for myself in case I find another project after the 101 finished !