Page 1 of 7
Infrared light lens covers
Posted: Sun Oct 16, 2016 11:31 am
by StuWright
Does anyone know where there is more information on the complete infrared set up used on Lwts?
Apart from the list of items used I'm interested to know if the lens glass is an actual coloured glass lens, or does it have a coating?
Re: Infrared light lens covers
Posted: Sun Oct 16, 2016 2:12 pm
by fv1620
Stu it is actually very dark red glass. In WW2 the British used the codeword "Tabby" based on the fact that a cat can see in the dark. I think the term was adopted in 1942 prior to that it was referred to as "RG Equipment" One interpretation of that was RG was referring to Red Glass. An alternative view that it was Red to Green. In that the glass was red & the fluorescing cathode screen in the image converter appeared green.
The clip-on filters on PW vehicles were originally flat but the later type was domed.
There were no special instructions that I have ever found. A case of fitting the lenses, throwing the IR switch & wearing the Common User Binoculars (Receivers)
Incidentally one of the German WW2 systems translated means "The equipment of the Tom cat" that is his capacity to see in the dark rather than any especially male attributes. Not such a clever "code" for either side to have used, rather gives away the secret.
Re: Infrared light lens covers
Posted: Sun Oct 16, 2016 4:31 pm
by StuWright
Thanks Clive, so if the glass is coloured do you reckon a glass polishing specialist could take out scratching without ruining the lens?
Re: Infrared light lens covers
Posted: Sun Oct 16, 2016 5:15 pm
by fv1620
I would have thought so. But scratched is not necessarily a bad thing, shows a bit of service action?
Re: Infrared light lens covers
Posted: Sun Oct 16, 2016 8:51 pm
by Sidders101
Just thought I would share these pics of the infra red lens supply box.
Re: Infrared light lens covers
Posted: Sun Oct 16, 2016 9:47 pm
by Gordon Bennett
Sid,
Thanks for sharing the pics. I've never seen one of those boxes before
Rgds,
Gordon
Re: Infrared light lens covers
Posted: Sun Oct 16, 2016 10:37 pm
by removeduser185
Nor have I. Fascinating. I have one IR lens and no idea what to do with it. If anyone else has a single one and wants to make up a pair...
Fred
Re: Infrared light lens covers
Posted: Mon Oct 17, 2016 8:51 am
by Sidders101
PM sent
Re: Infrared light lens covers
Posted: Mon Oct 17, 2016 5:13 pm
by Sidders101
Found another picture...not the best...of the lipped seals that fit between the lens surround and the headlight facia.
As you can't tighten the screws which hold the lenses in place I assume this rubber seal acts as tension to hold them in place once twisted over the brass screws. Keyhole fashion.
Re: Infrared light lens covers
Posted: Mon Oct 17, 2016 5:27 pm
by fv1620
Yes the rubber seal does help with retention but most importantly it is to seal the edges to avoid light leakage.