Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Sun Jun 18, 2017 2:59 pm

andrewjsimpson1977 wrote: ↑
Sun Jun 18, 2017 12:49 pm
...beer anyone?
Hi Andy,

Like your style :P

Yes, i'll have a beer with you mate :!

Rgds,
Gordon

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 18, 2017 3:07 pm

..and after an hour in the sun, a scrape with a very flexible razor blade (craft knife type), a wash down with white spirit, and a quick run over with a wire brush on the grinder..
IMG_4391.JPG
IMG_4391.JPG (122.52 KiB) Viewed 1516 times
Still a light sanding needed.. and obviously the welding, which I'll attempt this evening if it cools off enough to work.

Cheers Gordon! :!

Gordon Bennett
Maître Pâtissier
Posts: 7422
Joined: Sun Jan 10, 2010 12:21 pm

Re: Monty the rather rusty 2A - 37FG31

Post by Gordon Bennett » Sun Jun 18, 2017 4:27 pm

Hi Andy,

Looking good! It's come out very well.

Just cleaned the snake vivarium out. It's nice and warm so it's dried out nicely after a jolly good washing out :P

Now where has that snake gone :shock: Bet it's in my bed again :lol:

He's not been eating for a while so maybe he's eyeing me up :o

Hope you're having a smashing Father's day too!

Rgds,
Gordon

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Sun Jun 18, 2017 5:37 pm

Very satisfying! Looks good. Funny, you and I are very close in what we're doing at the moment. We're both working on axles and a couple of days ago I dragged my lower tub out for a good dose of looking at. I've been sitting in my thinking chair only this afternoon, staring at it, and working out how best to tackle it once I have the final wheel station in place. I'd like to get the back tub on, if only to get it out of the way, but, actually, because it's the datum for everything else. I bought a new floor and have generally put it to one side as, firstly, it needs painting and my neighbour is going to do a quick demo on how to use the paint spraying kit with my compressor (which he sold me!) I shall play thick until he has finished all the panels!! Secondly, I am still waiting form the tub strips - but who knows when or if they'll be ready. Kevin (V8Power) gave me some brand new Defender 110 ones in olive green which I am happy to fit if I can't get originals - it won't make much difference anyway, as there is a rubber mat for the rear tub so they'll never be seen.

Best

Fred

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 18, 2017 5:48 pm

Gordon: it's been a lovely day - hope yours was fun too?

My kids got me a bottle of small batch bourbon (this one tastes a lot more like an malt than Jim Beam type ones), some chocolates (which Mrs S and I will be breaking into once the kids go to bed) and a new lasagne oven dish which I have made good use of this afternoon.

Now stuffed, and still roasting hot and eyeing up the cold beer in the fridge.. I'm trying to decide whether the welding can wait til tomorrow..

What kind of snakes do you keep Gordon? I knew someone a long time ago that kept red sided garter snakes. I think our cats would be more than a little put out if one of those moved in!

Fred: We do seem to be in sync don't we. My reasons for starting the tub are the same, and because I'll feel like I have made more progress if it starts to look like a vehicle again, at least from the back.

Maybe I will pull the chassis out of the garage, turn it around and push it back in with the rear pointing outwards, so it looks like I have nearly finished :D

Good plan on the panels... just keep asking questions until he has done the lot.

The tub strips - not so urgent as they can be rivetted in at the last minute if necessary.. my money is better spent on paint and a new spray gun over the next few weeks anyway.

Race you to a finished tub? Sportman's wager obviously - loser buys the first pint at W&P 2018 :lol:

Andy

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Sun Jun 18, 2017 9:16 pm

I think the winner ought to have a battenburg! We could get Neil to present it and make a little speech!

Fred

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 18, 2017 9:27 pm

Oh that's thoughtful Ian, he'll love that.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Jun 18, 2017 9:50 pm

I'd give that idea a miss if I was you guys. Unless you want a speech of the kind Father Jack would deliver.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 18, 2017 9:57 pm

IMG_4489.JPG
IMG_4489.JPG (89.41 KiB) Viewed 1587 times

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Mon Jun 19, 2017 9:23 pm

I like Battenburg cake - our ships cook never tires of telling us he made Battenburg for the queen at a function when he was in the navy (but she never ate any :lol: ).
2A - 39 FG 70

Post Reply