Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 17, 2017 7:36 pm

So.. what to do about the underseal? I know Fred had recommended Kerosene - and having a kero-heated house I was about to draw some off from the main tank and get to work, when I noticed that some overspill from the paint stripper I was using on the other side of the floor, had absolutely ripped through the underseal too! Bingo.

As I had a five litre tub of the stuff (I'm using Starchem Synstrip), so I poured it all over both sides of the floor and gave it a scrub with a scotch pad, and a good rub down with some disposable cloths.

I'm pleased with the results - There is more to do but it is making the job a lot more tolerable, and I should be able to finish cleaning the floor up tomorrow. Incidentally, the synstrip is pretty good on the paint too. Some elbow grease is still needed, but it has stripped layers and layers off no problem.

If you are considering using the same stuff... I found that the best approach was to pour a good thick dollop of the stuff onto the area you are working on, and with a roller or spatula, push the 'wave' off gloop forwards and backwards. I think the issue with brushing it on thinly is that a thin layer reacts with the first layer of paint and quickly neutralises itself. I found that I got much better results if there was constantly a fresh source of paint stripper being flushed over the area.

Here is the floor after the first half an hour (about another hours work on it needed tomorrow to get it completely clean I reckon):
IMG_4382.JPG
IMG_4382.JPG (143.95 KiB) Viewed 1578 times
Tomorrow I hope to do the repairs on the floor, and leave it in a fit state to be primered next weekend.

As always hope I'm not droning on too much, and that the pics are semi-interesting.

All the best,

Andy
Last edited by andrewjsimpson1977 on Sat Jun 17, 2017 8:35 pm, edited 2 times in total.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 17, 2017 7:40 pm

Gordon Bennett wrote: ↑
Sat Jun 17, 2017 7:29 pm

I could say weld done, but it's more a case of weld undone!
:lol: Classic Gordon at work there :D

Yes hopefully I'll be treated to either landy or whisky related stuff. I don't really recognise any other commodities. 8-)

Thanks for the encouraging words Gordon - I'm overheated, dehydrated, burned to a crisp and throughly kernackered... but it was well worth it.

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sat Jun 17, 2017 8:04 pm

Hiya Andy! :D ,

Good to see you've achieved a fair bit given the temperature today, well done on cracking on with it mate. IIRC it was -9C when I was outside working on my tub, at least I could wrap up warm. There's only so many clothes you can take off to keep cool, especially if you're splashing paint stripper around, and given your history with powertools it was probably wisest to keep the body armour on.

I hope tomorrow sees you with an underseal free tub. A great Father's Day gift would be the family going out there and removing it for you.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 17, 2017 8:18 pm

Couldn't have put it better myself Neil :lol:

Yes - no flashdance style scantily clad welding or grinding for me.. I don't think anyone needs to see that.

I should have mentioned (I knew I forgot something).. the reason I switched to the tub today is that the chrome is taking ages to come off the swivel balls.. frustrating as I have many of the bits I need now to rebuild the front axle.. but it does give the outer housings longer in the de-rusting solution, and hopefully I'll have chance while I'm outside tomorrow to do another tidy up in the garage.

How is it that every time I think I've seen the last of the grim jobs... another load of gunge falls off something I had forgotten about, all over my lovely tidy garage floor?

I did find the bulkhead bracket bolts on my travels though, so they have been dipped and will get painted up tomorrow if there's time.

Andy

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sat Jun 17, 2017 8:55 pm

That tub will be lovely once it's finished - makes me wish I'd bothered to repair mine rather than replace it with a spare.
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 17, 2017 10:24 pm

Had that been an option for me Chris, I would have jumped at the chance by midway through today. I have rarely poured with sweat so much in my life. Chiselling out spot welds in 30 plus degrees bright sunshine is no joke. I have drank at least 3 litres of fluids since I got in.

I won't say which fluids obviously, as I told Mrs S I'm 'rehydrating'..

Landie68
Master Baker
Posts: 1564
Joined: Sat Dec 03, 2016 6:31 pm
Location: Herefordshire

Re: Monty the rather rusty 2A - 37FG31

Post by Landie68 » Sat Jun 17, 2017 10:43 pm

Sure was hot today, I gave trying to get the gaiter on 1 of the front swivels when I managed to get the forehead covered in Vaseline as I was attempting to wipe away the sweat. Dipped into the cider stock to rehydrate myself and boost the morale after the 3rd failed attempt at getting the gaiter fitted. Did manage to cut the grass though and got my Father's Day pressie from swmbo, more sweat required though to get it into the ground tomorrow after the bell ringing.
Regards
Richard

Discovery Sport
15FM83 ex 15 Para and 7 PO's

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 18, 2017 6:59 am

That's quite a cryptic post Landie... What is it? A Mast? A ground anchor? A blue Peter time capsule?

Don't leave us hanging :D

88lr
Posts: 285
Joined: Sat Jun 27, 2015 3:59 pm

Re: Monty the rather rusty 2A - 37FG31

Post by 88lr » Sun Jun 18, 2017 11:47 am

Quote, "I also didn't realise that at the fuel tank wires pass out of the bottom of the chassis - I was wondering what the ruddy big hole on the underside was for. Mine must have been bodged on the original chassis as I don't remember those wires being inside the rail at all." Unquote.

Do they? I didn't know and mine weren't part of the rear wiring loom. But, as it has been in civilian hands fora very long time, how it as is not evidence, but my fuel tank wiring is fixed with P Clips to the inside of the seatbox, then runs along the inside of the OS chassis member and into the dash/front loom. I can't quite see where they would go to if they were routed through the chassis.
Fred is right, they do not as such. What you will have is a separate loom, which connects to both tanks this should be run along the with fuel tank pipes (clipped to seat box and chassis top rail) and out and then towards the fuel tap, (you can run these along the top of the chassis and outrigger underneath the footwell) but then these the two wires are then joined to the main rear loom which comes up through the chassis. This is where you may be confused, as of course these two wires are the same colour, and this is where you connect the wires from the tanks. The fuel tap wires come from the main loom exiting from the dash. (use the hole nearest to the tap)
Incidentially Land Rover did a auxiliary fuel tank kit conversion for Civi vehicles using the military tank and tap (part number 6070704)

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 18, 2017 12:49 pm

That makes sense I think - will have to have a look at the rest of the loom. Thanks so much for the info!

Right.. as it is the end of Le Mans this afternoon, and I have cold drinks and a bag of ice, I'm determined to get my work done with the minimum of effort and mess. Ideally the work should do itself while I sit inside fanning myself and watching the brum-brums.

And so I give you.. the-tub-floor-covered-in-Mr-Muscle(two types)-and-shrink-wrapped-ensemble:
IMG_4386.JPG
IMG_4386.JPG (123.8 KiB) Viewed 1617 times
...beer anyone?

Andy

Post Reply