Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sat Jun 06, 2020 9:46 am

:lol:

In the first image of one I came to last night, they were round.

https://www.johncraddockltd.co.uk/34624 ... wagon.html

(Damn! No blowing a raspberry smiley when you need one.)

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 06, 2020 12:13 pm

AR4412 wrote: ↑
Sat Jun 06, 2020 9:46 am
:lol:

In the first image of one I came to last night, they were round.

https://www.johncraddockltd.co.uk/34624 ... wagon.html

(Damn! No blowing a raspberry smiley when you need one.)

Regards,
Ah I see the game you’re playing. Will the next ones be triangular I wonder, or octagons, or Rhomboid. The possibilities are almost endless.

Stillnotsquarethough

:D

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 06, 2020 4:21 pm

Alright folk fess up, who angered the restoration gods this time? Was Rob left in charge of the sacrificial cake again? :D

So while it’s hailing, in the south east, IN JUNE, I thought I’d throw a tarp over the landy and go looking for an insidey job to do. Inspired by Don’s shiney looking under arch toolbox, I dragged my shambolic example out of the outhouse and across to the garage for an inspection..

5335B7FC-9617-41FB-B964-64C6F10CAF2A.jpeg
5335B7FC-9617-41FB-B964-64C6F10CAF2A.jpeg (1.03 MiB) Viewed 1744 times

You can see that the lip/bracket thing has an extra bend in it, presumably where someone levered it out of the way to get at the rear lights wiring. Quite why they didn’t undo the four bolts fastening the box to the tub, or for that matter the three screws holding in the offending lamp, is beyond me.

9C141286-5547-4AD7-80C7-46472FC7BF22.jpeg
9C141286-5547-4AD7-80C7-46472FC7BF22.jpeg (1.1 MiB) Viewed 1744 times

It’s pretty straight otherwise, if a little scabby. Scabby I can help with though, so no worries there. At least no ally welding this time.

CAFC3975-6FC6-49BE-A168-90A517FABE94.jpeg
CAFC3975-6FC6-49BE-A168-90A517FABE94.jpeg (1.18 MiB) Viewed 1744 times

Just when I thought I’d seen the last of the bitumastic..

D5B7E4AE-E357-4575-87A4-C9A53FAB644C.jpeg
D5B7E4AE-E357-4575-87A4-C9A53FAB644C.jpeg (1021.73 KiB) Viewed 1744 times

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 06, 2020 4:30 pm

So, on to the stripdown..

Hasp and bracket added to the regalv pile:

E59446C3-656F-41A3-88C9-684E52195661.jpeg
E59446C3-656F-41A3-88C9-684E52195661.jpeg (1.58 MiB) Viewed 1744 times

Bent bracket thing removed ready for reshaping with the no. 1 persuader:

A25619D2-B6E6-4AE6-83FC-9A5F5FF7E3C0.jpeg
A25619D2-B6E6-4AE6-83FC-9A5F5FF7E3C0.jpeg (957.61 KiB) Viewed 1744 times

A better view of the damage here:

092BE60D-8FE3-435A-AAF2-23E8BCF2AA2D.jpeg
092BE60D-8FE3-435A-AAF2-23E8BCF2AA2D.jpeg (980.01 KiB) Viewed 1744 times

..the underseal was blowtorched and scrapered off, and it was out with the orbital sander to remover the many layers of DBG, dust, clay and claggy bits:

AA80BF6A-7969-492A-B915-B5BD38E474D9.jpeg
AA80BF6A-7969-492A-B915-B5BD38E474D9.jpeg (1.12 MiB) Viewed 1744 times
Last edited by andrewjsimpson1977 on Sat Jun 06, 2020 5:47 pm, edited 4 times in total.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 06, 2020 4:34 pm

This is as far as I got, as I need to wait for some more paint stripper to arrive to get the paint out from the seams and inside the box. It’s sat in evaporust at the moment soaking out some rust stains left behind by its former contents.

E8A5C700-4F67-438B-9528-2A06FF74196B.jpeg
E8A5C700-4F67-438B-9528-2A06FF74196B.jpeg (1.2 MiB) Viewed 1743 times
3A68C343-7274-42FD-A340-B37D0D5B56BF.jpeg
3A68C343-7274-42FD-A340-B37D0D5B56BF.jpeg (1.14 MiB) Viewed 1743 times
1382C9EC-F5DD-470C-A69D-3ACF828F30EC.jpeg
1382C9EC-F5DD-470C-A69D-3ACF828F30EC.jpeg (1.44 MiB) Viewed 1743 times

The bracket thingy straightened up nicely:

00C07B86-1AE2-443A-B9C3-92F0DEC05035.jpeg
00C07B86-1AE2-443A-B9C3-92F0DEC05035.jpeg (1.34 MiB) Viewed 1743 times

Surely that’s got to be worth a beer or two.

Hopefully more will be done tomorrow if the weather is better.

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sat Jun 06, 2020 6:38 pm

andrewjsimpson1977 wrote: ↑
Sat Jun 06, 2020 4:21 pm
Alright folk fess up, who angered the restoration gods this time? Was Rob left in charge of the sacrificial cake again? :D
That cake is enough to anger most things.
andrewjsimpson1977 wrote: ↑
Sat Jun 06, 2020 4:21 pm
Just when I thought I’d seen the last of the bitumastic.
It's when you see it in your sleep you've got problems mate.

Enjoy your beers. :!

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 07, 2020 11:10 am

Continuing the recent (and fascinating :roll: ) theme of Captive nut / bolt plates, feast your eyes on these beauties..

A4F1F020-1D88-4717-891D-58B553C69479.jpeg
A4F1F020-1D88-4717-891D-58B553C69479.jpeg (1.38 MiB) Viewed 1705 times

Now I know the ones on the right are the six for mounting the upper tub sides, but what are the others for? I do wish I’d kept better notes when pulling the thing apart, but in my defence, I remember half of these just falling out from somewhere during dismantling.

So what are they? Well they’re not for the upper tub seat belt mounts, as I have those two soaking in evaporust, and the rest of the seat belt mounts are all accounted for (and don’t use this type of retention). They are way too short to be tie down backers, and none of them match the hole pattern for the elusive missing striker nut plate. You know that one Neil? The one with square nuts :D

I’m guessing either Neil or Sid will know, but then again maybe they are 2a specific...?

All the elbest,

Andy

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Sun Jun 07, 2020 12:49 pm

The two short red ones for the joint between the top of the bulkhead and the upper tub sides - one of which takes the screw for the outer seat back fixing. Two of those with fixed bolts are for attaching the seatbox to the bulkhead. But, thereafter, I'm stumped at the moment. But, I'll give it more thought.
IMG_0419.JPG
IMG_0419.JPG (1.1 MiB) Viewed 1693 times
IMG_0418.JPG
IMG_0418.JPG (1.7 MiB) Viewed 1693 times

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 07, 2020 1:48 pm

Fred wrote: ↑
Sun Jun 07, 2020 12:49 pm
The two short red ones for the joint between the top of the bulkhead and the upper tub sides - one of which takes the screw for the outer seat back fixing. Two of those with fixed bolts are for attaching the seatbox to the bulkhead. But, thereafter, I'm stumped at the moment. But, I'll give it more thought.
IMG_0419.JPG

IMG_0418.JPG

Hiya Fred :D None of them seem long enough for the seat box application - I think maybe it’s just bolts and nuts there - at least in my case?

The two reds however - you are bang on! I hadn’t twigged that the two threads are different, with one being for the smaller screw that holds the outer eyelet position of the outer seat pads. Brilliant work, that’s two down thanks matey. What’s also good about that is they therefore tell me exactly where to drill the new seat back bulkhead panel for my first hole for the seat pads - and therefore sets the position of the pads themselves.

Much obliged,

Andy

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Sun Jun 07, 2020 2:49 pm

One other place where there is a nut plate is the rear left fixing above the under-body tool box on a GS. It is there to secure the left hand rear seat - because, without it it isn't possible to attach or remove the rear bench seat without having to remove the toolbox. But, that is a single nut with two rivet holes (you also need some more of those if you have an FFR to secure the battery box between the seats to the seatbox). The other place for nut plates is to secure the door handles to the doors, but, on mine at least - which is the later anti-burst pattern, they are a special shape. How about the fixing for the rear tailboard chains to the sides of the wheel arches? I haven't looked at mine and nothing shows up on any of my photos ,but that's a possibility.

Post Reply