Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Thu Jul 11, 2019 8:01 pm

andrewjsimpson1977 wrote: ↑
Thu Jul 11, 2019 6:18 pm
Aaaaaaand I've broken my welder (again).
D'oh!

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Jul 11, 2019 8:06 pm

AR4412 wrote: ↑
Thu Jul 11, 2019 8:01 pm
andrewjsimpson1977 wrote: ↑
Thu Jul 11, 2019 6:18 pm
Aaaaaaand I've broken my welder (again).
D'oh!

Regards,
D'oh indeed.

I suppose its life telling me to do the relay instead. Now I just need to do that without losing an eye or smashing a nearby window...

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jul 12, 2019 8:27 pm

A few more offerings to the restoration Gods this evening, in the hope that they will bless me with speedy arrival of welder parts.
All bulkhead related, apart from the rubber seal I made for the seatbox blanking plate, which is a cut down handbrake gaiter:

785FEA50-BA52-492C-97BC-EAE2BBF17865.jpeg
785FEA50-BA52-492C-97BC-EAE2BBF17865.jpeg (1.1 MiB) Viewed 2249 times

The zip ties, threaded bar and nuts & washers are the beginnings of the kit to fit the innards back into the steering relay housing:

B1E9C5CC-5766-4A15-BF6B-B1D0423FED98.jpeg
B1E9C5CC-5766-4A15-BF6B-B1D0423FED98.jpeg (1.08 MiB) Viewed 2249 times

0F40D5A7-994A-4D39-8370-64FF01C82AF7.jpeg
0F40D5A7-994A-4D39-8370-64FF01C82AF7.jpeg (172.45 KiB) Viewed 2249 times

I’ve done the brake pedal and the end caps for the relay too, but the paint’s not dry yet.

So now I have a new Autosparks wiring loom, refurbished dash panel, heater, steering wheel, column, and related bracketry, and I now have everything that fits to the engine side of the bulkhead...I just need a working welder and some paint!

Come on Mr Postman!

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jul 13, 2019 8:54 pm

A couple of bits of progress today..though nothing worthy of a photo.

I finally fitted the front brake shoes (hence the moan elsewhere about a missing anchor plate). It was frankly a miracle that I could find the springs after so long. Have also fitted one of Fred's brand new shiny brake adjusters to the driver's side (thanks Fred :D ), although I have a feeling from memory one of the rears needs replacing too - I'll check that out tomorrow, along with adjusting all the brakes as per the green book.

While I was tinkering I found a bit of rust on the wheel cylinders (they were fitted brand new). I should have thought at the time I fitted them about the bare metal casings. Too late to paint now, but thankfully the rust was really light and rubbed off. I have greased the casing lightly in the hope it keeps the worst at bay.

All four drive shafts are now in place, which was a bit of a sod of a job on the front as it required removing everything down to the swivels. I couldn't fit them previously because the front diff wasn't done, and as we know this has to go in first. Annoying. Anyway, it's all in and buttoned up now, and when I push the landy back and forth I now have the reassuring sight of the diffs spinning round. Great - some small hope returns that the gearbox might actually be able to drive the wheels around.

Other than that I de-rusted and primed the accelerator pedal and shaft, and gone nowhere near attempting the relay rebuild. Ah well...there's always tomorrow. I should have called it 'Project Mañana'.

All the best,

Andy

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sun Jul 14, 2019 12:11 am

Hi Andy,

I love the layout photo's on the dining table, looks like a magazine photoshoot!

To stop rust on fitted shiny bits try something like tectyl 506, a sort of waxoyl i suppose but it sprays on nicely and smells lovely. We've just been sent two deck generators for a project and they've both been lathered in the stuff!

Anyway keep up the good work, it gives me something to look at when our asthmatic satellite internet connection behaves.

Cheers,

Chris
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jul 14, 2019 9:30 pm

Thanks Chris I’ll look for the tectyl stuff.

Today was all about the steering relay. No point going into detail as it’s been covered elsewhere more than once. I used the two clips method:

1DD2BFB4-6F6A-4DA3-ADED-BEFC5F67C2EE.jpeg
1DD2BFB4-6F6A-4DA3-ADED-BEFC5F67C2EE.jpeg (782.58 KiB) Viewed 2160 times
0157782D-53D9-40DA-9FA3-F9A897A705EC.jpeg
0157782D-53D9-40DA-9FA3-F9A897A705EC.jpeg (856.97 KiB) Viewed 2160 times
E4B136B2-1C29-4C84-A544-C9C4C3B7443F.jpeg
E4B136B2-1C29-4C84-A544-C9C4C3B7443F.jpeg (1.02 MiB) Viewed 2160 times

I also replaced the rear offside brake shoe adjuster, as the old one had magically shed its spring, but not it’s bolt. I think that’s the Land Rover equivalent of the old tablecloth trick.

Hopefully welder parts next week, fingers toes and eyebrows crossed.

Andy

User avatar
gunner59
Posts: 67
Joined: Sat Apr 28, 2018 12:42 pm

Re: Monty the rather rusty 2A - 37FG31

Post by gunner59 » Mon Jul 15, 2019 11:09 am

I feel your pain and angst from waiting for the welder to arrive, I've had similar pangs waiting interminably it seems for that all important part to arrive from the mother country. And the absence of which means I have to start a different task which then in turn then gets put on hold as soon as the missing part arrives. Ho, hum. Onwards, upwards and even sideways (at times).
85KA17 - 1982 Lightweight GS, 50 Missile Regiment Royal Artillery BAOR

12KJ74 - 1990 Defender GS, 1/2/3/ Gurkha Rifles Hong Kong Garrison

Undated narrow track Sankey trailer, chassis plate stamped 1229RN

Jon S
Posts: 452
Joined: Sun Jun 14, 2015 10:01 am

Re: Monty the rather rusty 2A - 37FG31

Post by Jon S » Mon Jul 15, 2019 11:12 am

Hi Andy

Just out of interest, was the steering relay leaking and was there any oil in it before you took it apart? They look very fiddly to re-assemble, so was thinking of not stripping mine when the time comes, if no leaks and oil within, just painting it.

Regards

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jul 15, 2019 12:48 pm

gunner59 wrote: ↑
Mon Jul 15, 2019 11:09 am
I feel your pain and angst from waiting for the welder to arrive, I've had similar pangs waiting interminably it seems for that all important part to arrive from the mother country. And the absence of which means I have to start a different task which then in turn then gets put on hold as soon as the missing part arrives. Ho, hum. Onwards, upwards and even sideways (at times).
Thats a pretty good summary of my life right there!
Jon S wrote: ↑
Mon Jul 15, 2019 11:12 am
Hi Andy

Just out of interest, was the steering relay leaking and was there any oil in it before you took it apart? They look very fiddly to re-assemble, so was thinking of not stripping mine when the time comes, if no leaks and oil within, just painting it.

Regards
It was bone dry, due I think to the seals having perished to raggedy pale imitations of their former selves. I tried adding some oil, but by then the original bushings were pretty rough, so it still wouldn't turn without a lot of force. Rebuilding was the only way in my case, but I would definitely recommend adding some oil first and seeing if you have more luck. If you don't need to take the spring and shaft out that's a win. You can fit new seals into the end caps without disturbing the main body, and there's no risk of the shaft, bushings and spring coming out unless you decide to knock them out with a hammer. Just remember to remove the steel outer pieces of the old seals. A lesser man would have struggled for half an hour or so to fit new seals to holes that were 'too small'. Not saying I know anyone who did that or anything.. :roll: :|

Having said all that, the job of rebuilding it isn't half as scary as the fables of old would have you believe. If I (surely the clumsiest of club members) can do it - you'll be just fine. I made the two clips out of two strips of thin steel (1.2mm off cuts I think). The folded ends were made by hammering the strips having clamped them up between two bits of wood, with the bit to be folded sticking out. The distance between the folds (length of the finished clips) is the distance between the two 'hourglass' sections of the relay shaft, so the spring can be compressed small enough to get the bushings on. If you make this dimension no smaller than it absolutely needs to be, the spring will be only just small enough to fit between the bushings. Hence, when you cut the zip ties, the spring doesn't have so far to travel before it slams into the bushings and so you don't get the big 'BANG' that others have described. Just my two-penneth worth into the great relay rebuild folklore :D

If you do decide to rebuild it - give me a shout if you want talking through it. Once you have all the parts and tools together, the job is no more than half an hour from bits to completed relay.

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Mon Jul 15, 2019 7:01 pm

Hiya Andy! :D ,

Happy to see that you got the steering relay back together without loosing an eyebrow.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Post Reply