Page 3 of 4
Re: The Big One…
Posted: Fri Jan 07, 2022 8:04 pm
by diffwhine
Loulou - please post more pictures.. I haven't had my Scammell fix today...
Very keen to see how this develops, so please do keep this thread going. We used to have an Explorer, so I know how difficult it is to crank over. Its hard enough to press the clutch - especially on a cold morning. It virtually took two of us to drive the thing!
Re: The Big One…
Posted: Sat Jan 08, 2022 4:56 am
by Loulou
Hello Diffwhine,
Okay it's noted as soon as we have some spare time and some interesting photos.
Indeed, piloting the Scammell is a serious matter for men ...
Regards
Looloo
Re: The Big One…
Posted: Sun Jan 09, 2022 2:36 pm
by Loulou
Hello Gentlemen,
First attempt by the crazy Frenchies to restart Scammell ...
Well, it coughs a lot "koff-koff-koff" but it does not fart properly ...
The observation:
- it turns smoothly on the crank, but it's sporty ...
- a lot of diesel leaks everywhere
- Amal pump diaphragm safely rinsed
- dead starter solenoid
- very poetic electrical diagram
- bulk diesel feed return
I reassure you… everything was ok with the oil, coolant, fresh diesel and basic checks.
Well ... we're going to have a job ...
We start next week with the electric circuit.
Have a nice sunday
Regards
Looloo
Sorry for the very bad photo of the team, the priority was not to the photos…

- PhV-Manivelle-Small.png (619.82 KiB) Viewed 13645 times

- bad shoot team-small.png (314.31 KiB) Viewed 13645 times
Re: The Big One…
Posted: Fri Jan 28, 2022 4:48 pm
by Loulou
Hello gentlemen,
Well ... Our Scammell has finally started ... after some efforts and disassembly sessions-reassembly of the injection pump group.
Kof-kof-kof for both Gardner and participants: a blue and oily cloud in all buildings.
It turns more or less round, sometimes square ... but it turns.
First observations: it will cost us a lot of budget and a lot of time but it's worth it, the vehicle is rare and extraordinary !!!
Sorry, no photos for the moment, the priority was to be attentive to the beats of the 6 cylinders Gardner and not to the fashion shoot.
Good weekend to all
Regards
Looloo
Re: The Big One…
Posted: Fri Jan 28, 2022 11:02 pm
by diffwhine
Well done you "crazy Frenchies"! (Your words - not mine!)
Really looking forward to seeing more on this.
A slight oddity, but a very dear old friend of mine is a a long retired mechanical engineer. He's a Bosnian living in Sarajevo. His knowledge of Gardener diesels of that era is outstanding thanks to the number in service in Yugoslavia. If you need some advice (and I can wake him up), he may well be able to provide you with some useful period technical detail.
Re: The Big One…
Posted: Sat Jan 29, 2022 6:37 am
by Loulou
Hi Diffwine,
Thanks for your proposition.
We are also in contact with Joe McCool; any data will be very useful to us.
We are also looking for a rim in fair condition to have a spare wheel.
Good weekend to all.
Looloo
Re: The Big One…
Posted: Sat Jan 29, 2022 7:35 pm
by AR4412
Hi Looloo,
Congratulations on getting the beast fired up.
Regards,
Re: The Big One…
Posted: Wed Feb 23, 2022 7:50 am
by Loulou
Hello Gentlemen,
Some news from the crazy project…
The injection pumps were dismantled and left for revision in NI.
We are currently carrying out an audit of the defective parts and everything we will need, it is starting to cost seriously in terms of budgets.
Two front tires are on order, those currently fitted are dead…
Getting the Scammell out of the reserves was a great adventure… as everyone knows, a Scammell doesn't steer and doesn't have power steering…
Therefore, we towed and pushed it with a GMC CCKW in the front and another in the back in order to get out of the storage shed.
A break in the driveway for two hours of Kärcher steam, what a shower!

- Karcher-PhV-2-small.png (838.9 KiB) Viewed 13588 times
Under the beast with goggles and the high pressure lance it releases...
Then set up in reverse on its reconstruction location; to steer seriously we used a Fenwick to relieve the front axle and turn the steering wheel more easily…
In short, a day of maneuvering and cleaning, with an aperitif break in the middle... Good, but it's still tiring at our advanced ages...

- Scammell-Park-1-small.png (679.2 KiB) Viewed 13588 times

- Scammell-Park-2-small.png (760.62 KiB) Viewed 13588 times
We are looking for a clean rim because we don't have a spare wheel; if you occasionally go to a nearby scrap metal dealer...
Good morning everyone
Looloo
Re: The Big One…
Posted: Wed Feb 23, 2022 6:53 pm
by Fossibear
Wow - what a machine
Looking forward to what will happen,
Steve
Re: The Big One…
Posted: Thu Aug 25, 2022 6:38 am
by Loulou
Hello Gentlemen,
Our work is in progress...

- Scammell-work-Pa-1-small.png (772.68 KiB) Viewed 13270 times

- Scammell-work-Pa-2-small.png (801.62 KiB) Viewed 13270 times
It's heavy…
Regards.
LL