Rattler's 2a civvy restoration project

Tell us about any of your Land Rover related projects here.
Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Mon Feb 25, 2019 7:06 pm

Few more
Attachments
IMG-20190223-WA0009.jpg
IMG-20190223-WA0009.jpg (214.2 KiB) Viewed 2162 times
IMG-20190223-WA0008.jpg
IMG-20190223-WA0008.jpg (234.32 KiB) Viewed 2162 times
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Mon Feb 25, 2019 7:12 pm

And these pic's are from today :)
Attachments
IMG-20190225-WA0000.jpg
IMG-20190225-WA0000.jpg (257.26 KiB) Viewed 2161 times
IMG-20190225-WA0001.jpg
IMG-20190225-WA0001.jpg (165.63 KiB) Viewed 2161 times
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Tue Feb 26, 2019 10:13 pm

Well I literally emptied the garage out today to look for the clutch release shaft to no avail so I ended up buying a new one and once I put everything back in the garage I decided to fit the steering rods and injector pipes then a delivery of other bit I ordered last week arrived amongst them was a gallon of ep90 and a new slave cylinder so I immediately set work fitting the slave cylinder and topped up the gearbox and transfer box :)
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Wed Feb 27, 2019 6:48 pm

Dragged the tub in today to give the underside a good cleaning then removed the X members which revield a couple of hose which i need to sort out then i removed all the aditianal nuts and bolts the p.o had fitted over the years :)
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Thu Feb 28, 2019 6:30 pm

Made a few repairs to the tub today as 5 of the X member fixing points was corroded on the rails so I plated all 15 points so the X members would fit properly then I fitted a patch to the tub floor, I do plan to chequer plate the inside of the tub so the rivets will be covered, I also plan to get the underside jet washed so it can be painted :)
Attachments
IMG-20190227-WA0003.jpg
IMG-20190227-WA0003.jpg (345.06 KiB) Viewed 2105 times
IMG-20190227-WA0002.jpg
IMG-20190227-WA0002.jpg (307.63 KiB) Viewed 2105 times
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Thu Feb 28, 2019 9:25 pm

Sorry the rest of the pics i took at the same time are for some reason two big so will try and take some better ones tomorrow :o
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Fri Mar 01, 2019 8:47 pm

Spent the afternoon removing the cappings ready for painting :)
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Sat Mar 02, 2019 6:18 pm

Left the paint stripper to do its work this morning, will try and scrape all the old paint / underseal off tomorrow :)
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Sun Mar 03, 2019 6:30 pm

Scraped all the old paint / underseal from the underside of the tub today then I filled in all the additional holes in the tub with pop rivets and once the tub parts I've ordered come in I can fit some before the tub gets painted :)
---------------
Graham

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Sat Mar 09, 2019 5:30 pm

Not done much today just fitted the X members and cleaned a few bits up :)
---------------
Graham

Post Reply