Turns out it’s not the gearbox tunnel!!!?

If you have encountered or solved a problem post here
Bagpuss8993
Posts: 1
Joined: Sun Dec 28, 2025 8:15 pm

Re: Turns out it’s not the gearbox tunnel!!!?

Post by Bagpuss8993 » Sun Sep 06, 2026 6:20 pm

Hi lightweight lovers, i've been searching for measurements for exactly the same job. Im fitting a V8 also, it had a 19j in it previously and the tunnel fitted perfectly. I have removed the seat box and tunnel to paint, and after fitting the V8 and reassembling the seat box and tunnel was presented with exactly the same issue. I was trying to figure out what had gone wrong. Tunnel still not in but next will be to modify the engine mounts, but prior to modification takes place, did the elongating of the engine mounting holes work or was there another solution. Cheers chaps.
X2 Freelander 2, x1 freelander 1, x 2 discovery 2's, x1 Rangerover classic, X1 landrover lightweight 50HG30.

Post Reply