Brake Master Cylinder Overhaul

If you have encountered or solved a problem post here
jor henderson
Posts: 63
Joined: Mon Jun 13, 2016 11:14 am

Re: Brake Master Cylinder Overhaul

Post by jor henderson » Tue Mar 31, 2020 4:31 pm

sounds logical, thinking about it; if the master cylinder was sealed to the servo it would be possible for it to fill with fluid before any external sign showed except for the fluid going down.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Brake Master Cylinder Overhaul

Post by AR4412 » Tue Mar 31, 2020 7:02 pm

Jon S wrote: ↑
Mon Mar 30, 2020 9:05 pm
I would guess that the grove was there in the event of any of the piston seals leaking. The brake fluid could then drain out visibly and indicate to the operator that there was a problem. If this happened, the operator may have already noticed that the brake fluid level had dropped in the reservoir during the daily checks, seeing the fluid leaking out of the grove, could cut down on time spent looking for the leak. Just a guess!

Regards
M Cyl Leak.jpg
M Cyl Leak.jpg (29.11 KiB) Viewed 670 times
A picture, taken this morning, of the brake fluid running down the servo, from the leaking master cylinder seal on a 1980 Lightweight at where I work. The pic was taken after the front of the servo was given a wipe down at the end of play yesterday, and the brakes applied five times. Pedal pressure is still sufficient to stop the vehicle satisfactorily.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Brake Master Cylinder Overhaul

Post by Loulou » Wed Apr 01, 2020 10:07 am

Same comment.
After disassembly, I shook the servo and it was "floc-floc" inside: I removed 1/2 liter of brake fluid ... despite a master cylinder of satisfactory appearance. I conclude that this situation must have gone on for quite some time despite a "satisfactory" slowdown
Everything is changed by something new.

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

aerialphil
Posts: 136
Joined: Sun Apr 22, 2012 12:43 pm

Re: Brake Master Cylinder Overhaul

Post by aerialphil » Sat Apr 04, 2020 9:14 pm

Considering how important this part is to safety I would rather fit a brand new one with an unworn cylinder and new seals. Instead of a 40 year old + item with wear to the bore and old rubber seals for the grand sum of £45 A no brainer Phil

Post Reply