Old fuel cap does not fit new tank.

If you have encountered or solved a problem post here
Post Reply
RangeRoverFrank
Posts: 3
Joined: Wed Aug 26, 2026 8:14 pm
Location: Aachen - Germany

Old fuel cap does not fit new tank.

Post by RangeRoverFrank » Wed Aug 26, 2026 8:27 pm

Hello everyone,

I’ve been restoring my 1971 Land Rover Lightweight Series 2a for a few years now.
Since the old fuel tanks had rusted through, I bought new ones from Paintman Panels.

Unfortunately, I’ve discovered that the original fuel cap no longer fits.

The sealing plate rubs against the groove in the filler neck, or rather, the filler neck is too tight.

Do you have any ideas on how I can resolve this?

Many thanks for the help.
Best regards,
Frank

Image

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Old fuel cap does not fit new tank.

Post by AR4412 » Thu Aug 27, 2026 8:03 pm

Hi Frank, and welcome.

Sorry to hear you're having problems. I have no direct experience of a Paintman fuel tank, or of any issues with them, so might not be of much help to you. All I could think of to possibly offer a bit of help was to measure an old original tank of mine. Well, three tanks to be precise, to get an average masurement.

The outer diameter of the top lip is 109 mm. The lip itself is 4mm wide, The top face of the lip is 16.5mm from the top of the tank itself.
TANK 1.jpg
TANK 1.jpg (332.24 KiB) Viewed 18503 times
The inside diameter of this lip is 99 mm.
TANK 2.jpg
TANK 2.jpg (221.49 KiB) Viewed 18503 times
The thin inner seal retaining ring inner diameter is 90/90.5 mm and it is 4mm down from the top face of the outer lip.
TANK 3.jpg
TANK 3.jpg (1.06 MiB) Viewed 18503 times
The inner neck of the tank, (with the lugs for the removable filler neck), also has a 90 mm diameter, and is 16 mm down from the top face of the top lip.

I haven't measured the filler cap as yours is original and obviously fitted the original tank okay.

I hope this may be of some help in some small way to compare the the Paintman tank you have.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

RangeRoverFrank
Posts: 3
Joined: Wed Aug 26, 2026 8:14 pm
Location: Aachen - Germany

Re: Old fuel cap does not fit new tank.

Post by RangeRoverFrank » Fri Aug 28, 2026 1:53 pm

Hello Neil,

Thanks a million for your help.

With the information you provided, I was finally able to compare the new tank.
It looks like the dimensions of the aftermarket tank are correct.

The problem is the cap. It seems to have expanded over the years and is now 0.4 mm wider.
As a result, it no longer fits into the opening.

Image

I’ve ordered two new caps that are supposedly genuine new parts.
We’ll see then if that’s the issue.

Without your measurements, I would have been searching for a long time, since I was foolish enough to get rid of the old tanks to save space.

So, thanks again!

If you’re up for it, could you please measure the inner ring of your tank cap? I mean the inner sealing disc.

Best regards,
Frank
Last edited by RangeRoverFrank on Fri Aug 28, 2026 1:54 pm, edited 1 time in total.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Old fuel cap does not fit new tank.

Post by AR4412 » Fri Aug 28, 2026 4:00 pm

Hi Frank,

I did measure it, and IIRC, it was 98.5mm. But, I will confirm that when home tonight.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Old fuel cap does not fit new tank.

Post by AR4412 » Fri Aug 28, 2026 6:25 pm

As I remembered, 98.5 mm.
Cap..jpg
Cap..jpg (330.49 KiB) Viewed 18470 times
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

RangeRoverFrank
Posts: 3
Joined: Wed Aug 26, 2026 8:14 pm
Location: Aachen - Germany

Re: Old fuel cap does not fit new tank.

Post by RangeRoverFrank » Sat Aug 29, 2026 10:10 am

Hello Neil,

Thanks a lot for your efforts.

It must be down to my old fuel caps. They’ve likely expanded over the years and are now 1mm wider than when they were new.

I’m curious to see the dimensions of the new caps and whether they’ll fit straight away.
Without your help, I’d have been left guessing for a long time.

Thanks again for your help.
I’ll keep you posted.

Best regards,
Frank

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Old fuel cap does not fit new tank.

Post by AR4412 » Sat Aug 29, 2026 10:13 am

You're welcome Frank,

I hope that the new caps fit straight out of the box.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

RangeRoverFrank
Posts: 3
Joined: Wed Aug 26, 2026 8:14 pm
Location: Aachen - Germany

Re: Old fuel cap does not fit new tank.

Post by RangeRoverFrank » Mon Aug 31, 2026 7:55 pm

Hello Neil,

The caps fit the tanks now.

I had to significantly widen the filler openings on both tanks; the openings were about 0.5 mm too tight on each side in the area of ​​the cutouts.
I did the same to the inner ring so the filler necks could still be pulled out.

Image

Image

It’s not exactly precision manufacturing, but at least it got me two new NOS fuel caps.

And after the water test, everything is ready for painting.

Image

Thanks again for your help!
I was actually on the verge of cutting the tanks open and welding in different filler necks.

Best regards,
Frank

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Old fuel cap does not fit new tank.

Post by AR4412 » Mon Aug 31, 2026 7:59 pm

Happy to hear that the caps fit the tanks, & that your bum shouldn't get too wet if you manage to get it all upside down ways.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

Post Reply