Late Zenith 4085 specification 36iv carburettor

If you have encountered or solved a problem post here
Post Reply
Devon13
Posts: 13
Joined: Sat Oct 26, 2024 1:44 am

Late Zenith 4085 specification 36iv carburettor

Post by Devon13 » Sat Jul 25, 2026 10:19 pm

Apparently because of the metal tag reading 4085 (The 4085 specification designates the late-model factory Zenith variant supplied for the Land Rover Series 3 2.25L Petrol engine between 1981 and 1985) although mine is 1979, it indicates that i have a genuine original Zenith 36IV carburettor but there is no Zenith stamp or logo anywhere on the carb body. If it’s not genuine then I presume it’s not worth getting it refurbished and should replace it. If it is genuine then any recommendations for a reputable carburettor centre in South Devon, Exeter area please?
Attachments
IMG_1882.jpeg
IMG_1882.jpeg (1.09 MiB) Viewed 10454 times
IMG_1883.jpeg
IMG_1883.jpeg (2.16 MiB) Viewed 10454 times
IMG_1881.jpeg
IMG_1881.jpeg (2.09 MiB) Viewed 10454 times
IMG_1880.jpeg
IMG_1880.jpeg (1.94 MiB) Viewed 10454 times
09GT01 s111 1979 12v Ex - 30 Sig Regt / 21 Sig Regt / 31 Sig Regt (v) / 39 Sig Regt (v)
Mark

User avatar
fv1620
Bake Off Judge
Posts: 2268
Joined: Thu Oct 06, 2011 2:16 pm
Location: GB-CMN (formerly UK91)
Contact:

Re: Late Zenith 4085 specification 36iv carburettor

Post by fv1620 » Sat Jul 25, 2026 11:03 pm

Mark I thought there was a carb rebuild company in the vicinity of Newton Abbot. I couldn't find them but I did stumble on this which is your area.

https://www.exetercarbs.co.uk/
Clive Elliott

Collecting military technical publications, researching into military vehicle electrical systems, licensed radio amateur since 1964 using microwave bands for tropospheric scatter.

Devon13
Posts: 13
Joined: Sat Oct 26, 2024 1:44 am

Re: Late Zenith 4085 specification 36iv carburettor

Post by Devon13 » Sun Jul 26, 2026 8:12 am

Thanks for the link, all depends on if mine is a genuine one, if it is and for the sake of originality I will get it rebuilt/overhauled but if it’s not, don’t see the point of paying out to rebuild a copy if I can buy a genuine Zenith that has been rebuilt for the same price. I really need to determine if mine is genuine first.
09GT01 s111 1979 12v Ex - 30 Sig Regt / 21 Sig Regt / 31 Sig Regt (v) / 39 Sig Regt (v)
Mark

Post Reply