Instrument panel removal & refurb
Instrument panel removal & refurb
Morning, I am trying to disconnect everything so I can take out the instrument panel but having difficulty with the cold start cable & the water temperature & oil temperature gauges. Is the only way to remove the cold start cable by disconnecting at the carb & pulling the cable through the bulkhead & then panel. Ref the temp gauges , I can’t pull them out or unscrew them, is that because they are rusted in or is there another method to disconnect them. Any advice would be much appreciated.
- Attachments
-
- IMG_0438.jpeg (1.91 MiB) Viewed 10350 times
-
- IMG_0434.jpeg (2.51 MiB) Viewed 10350 times
09GT01 s111 1979 12v Ex - 30 Sig Regt / 21 Sig Regt / 31 Sig Regt (v) / 39 Sig Regt (v)
Mark
Mark
Re: Instrument panel removal & refurb
Hi Mark,
The choke cable will need removing from the carb and pulling through the bulkhead before removing the cold start switch and then the cable from the panel.
The temperature gauges you have are the Bourden tube, or capillary type, which has a tube from the gauge to a bulb at the other end. To remove them with the dash panel requires their other ends to be removed from the engine. Easier to undo the two screws holding each of the gauges to the combined cluster. If the gauges work, take care not to damage them or the tubes as they are expensive to replace. If they don't work, it may be worth the time to 'upgrade' to the later electrical gauge cluster.
Regards,
The choke cable will need removing from the carb and pulling through the bulkhead before removing the cold start switch and then the cable from the panel.
The temperature gauges you have are the Bourden tube, or capillary type, which has a tube from the gauge to a bulb at the other end. To remove them with the dash panel requires their other ends to be removed from the engine. Easier to undo the two screws holding each of the gauges to the combined cluster. If the gauges work, take care not to damage them or the tubes as they are expensive to replace. If they don't work, it may be worth the time to 'upgrade' to the later electrical gauge cluster.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.