Hi,
Finally getting around to welding my Chassis, does anyone have a drawing of the chassis with dimensions?
I also have to cut down the two bulkhead outriggers as mine are form a Standard Series 3 .
Any help appreciated
I must be mad !
Chassis Diagram with dimensions
Re: Chassis Diagram with dimensions
If you do an online search for 'Land Rover Series 3 chassis dimensions', you should find one that you can download or print. The Lightweight chassis has excatly the same dimentions for the main framework as a civilian vehicle.
IIRC the civilian outriggers are about 30mm to long for the bolt hole to be in the right place, and too long from the centre of the bolthole to the outer edge to get the sill on. From my measurements when I did the welding repairs to my chassis, from the outer edge of the chassis main rail to the bulkhead bolt hole centre was 355mm, and 355mm to the outer face of the outrigger once everything was trimmed to suit. Giving an overall width from the outer edges of the bulkkhead outriggers of 1495mm on my chassis. I welded my outriggers on one side at a time without disturbing the bulkhead so that I knew everything would line up once stripped down and then rebuilt. A luxury you don't have. The bulkhead foot hole cetres were 1455mm apart on my bulkhead, but please measure yours before cutting and welding to ensure the holes in your outriggers will line up with the holes in your bulkhead.
Regards,
IIRC the civilian outriggers are about 30mm to long for the bolt hole to be in the right place, and too long from the centre of the bolthole to the outer edge to get the sill on. From my measurements when I did the welding repairs to my chassis, from the outer edge of the chassis main rail to the bulkhead bolt hole centre was 355mm, and 355mm to the outer face of the outrigger once everything was trimmed to suit. Giving an overall width from the outer edges of the bulkkhead outriggers of 1495mm on my chassis. I welded my outriggers on one side at a time without disturbing the bulkhead so that I knew everything would line up once stripped down and then rebuilt. A luxury you don't have. The bulkhead foot hole cetres were 1455mm apart on my bulkhead, but please measure yours before cutting and welding to ensure the holes in your outriggers will line up with the holes in your bulkhead.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
-
AlbertaBoy
- Posts: 30
- Joined: Tue Jul 12, 2022 5:42 am
Re: Chassis Diagram with dimensions
Thanks for the information appreciated