Wiper problem

Tell us about any of your Land Rover related projects here.
Post Reply
martinN
Posts: 110
Joined: Sat Oct 10, 2020 2:26 pm

Wiper problem

Post by martinN » Tue Dec 26, 2023 3:16 pm

The tubes in which the wiper cable runs. Is it straight. Mine is kinked which makes it very stiff to operate. Advice.

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Wiper problem

Post by AR4412 » Wed Dec 27, 2023 2:35 pm

The short tube from the wiper motor to the left wheel box has a gentle curve to it of around ten degrees of angle. The tube between the two wheel boxes on mine has two gentle curves in it, again of around ten degrees each, to 'drop' the tube height by around 30mm and align it with the right wheel box, which is mounted the other way up to the left hand one. IIRC, replacement/new tubes came straight and were 'bent to suit'. My 73 lightweight had a gentle bend at each end, where the 80 lightweight has both curves at one end.

Too tight a curve, a dent, or a 'crease' in the tube, will make the rack hard to pull/push through, as will a partially seized wheel box.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Wiper problem

Post by Loulou » Sat Dec 30, 2023 8:15 am

Hi,

And surprisingly, the new wheel boxes in blue boxes are manufactured in the UK in the same way as the original ones.

Given the price in relation to the manufacturing quality, I changed both on my LWT (axes massacred by time and previous owners).
The carefully restored-aligned tube and cable = smooth windshield wipers...
A real pleasure to drive in the rain!

Regards.
Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

martinN
Posts: 110
Joined: Sat Oct 10, 2020 2:26 pm

Re: Wiper problem

Post by martinN » Sun Dec 31, 2023 2:54 pm

Dont suppose you have the part numbers for the tubes and boxes?

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Wiper problem

Post by AR4412 » Sun Dec 31, 2023 3:35 pm

560885. Tube, motor to wheel box.
560886. Tube, wheel box to wheel box.
575047. Tube, short. (End piece.)
560887. Wheel box.
601701. Core, flexible shaft.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

martinN
Posts: 110
Joined: Sat Oct 10, 2020 2:26 pm

Re: Wiper problem

Post by martinN » Sun Dec 31, 2023 4:52 pm

Thanks.

Post Reply