Mine looks like a lace curtain and don't fancy trying to weld in so much new sheet.
Is there any advice or plans/drawings for 'narrowing' a standard Slll scuttle?
I'm expecting a large bill for any existing LW scuttle, unless anyone knows who may be making them in numbers.
Project tucked away in Lincs.
1980 Ex-Cyprus based. Purchased from Cast and Shipped by Herc to Brize. Q plated and sold to me in 94.
Now on 1980 W plate after help from Gaydon and DVLA.
Healthy original chassis and straight body.
Replacement aluminium door tops.
Rear True-Track Lock-Right Diff fitted (plus 1 new identical spare diff intended for the front axle).
Poor hydraulics and stuck clutch.
Good electrics and lighting.
Full windscreen-to-rear bespoke roll cage fitted, but all original parts saved including gun rack (SLR).
Modern 7in lamps fitted, but originals (minus IR covers) retained.
Basically this is a stripped down original, prepared and utilised in 1996 for a few off-road play days plus about 300mi per year over 6 of the last 26 years. Remainder of time stood fallow under a sheet.
Scuttle replacement advice needed. Slll Air portable 12v.
-
CagedAirPotable
- Posts: 5
- Joined: Fri Jul 03, 2020 8:57 pm
- Location: Lincs PE23
Re: Scuttle replacement advice needed. Slll Air portable 12v.
Welcome to the forum. Feel free to post up some pics of your lightweight as we like pics on here we do.
Vent panels aren't the cheapest and most plentiful of Lightweight parts out there. Good ones are reflected in their price, and even rotten but saveable ones aren't cheap anymore. LR shows/autojumbles are a better place to get one from, if you can find one there, as they tend to be a lot cheaper than on waltbay, and you can try to haggle the price down.
Shielder Chassis advertise them, but I have no knowledge of how good they are in the flesh, and they might be the wrong patern for the age of your vehicle, depending on whether your washer jets are in the vent panel or in your bonnet.
Regards,
Vent panels aren't the cheapest and most plentiful of Lightweight parts out there. Good ones are reflected in their price, and even rotten but saveable ones aren't cheap anymore. LR shows/autojumbles are a better place to get one from, if you can find one there, as they tend to be a lot cheaper than on waltbay, and you can try to haggle the price down.
Shielder Chassis advertise them, but I have no knowledge of how good they are in the flesh, and they might be the wrong patern for the age of your vehicle, depending on whether your washer jets are in the vent panel or in your bonnet.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Scuttle replacement advice needed. Slll Air portable 12v.
I don't think it would be feasible to cut down a vent panel from a standard Land Rover as it isn't a separate part, it's part of the bulkhead and, by the time you'd finished cutting it off therre would be sommuch work to make it uo as a ligthtweight one, it wouldn't be worth it. As Neil suggests, keep an eye out for one on eBay or at an auto jumble once they're up and runing again. Malvern and Newbury are always worth a trawl round.
-
CagedAirPotable
- Posts: 5
- Joined: Fri Jul 03, 2020 8:57 pm
- Location: Lincs PE23
Re: Scuttle replacement advice needed. Slll Air portable 12v.
Gents thanks for the reply. If any of you spot one on your visits to any auto jumble down South, may I suggest that you do get their details and pass them on to me in exchange for a fair and reasonable reward.
Alternatively you may pass on my email address (from this forum to the vendor along with your details. If good comes from it then the same reward applies.
I have stored a video of the motor in the cloud for anyone to share or view. Hopefully the link below will take you there:
https://drive.google.com/file/d/11yIPp8 ... p=drivesdk
Alternatively you may pass on my email address (from this forum to the vendor along with your details. If good comes from it then the same reward applies.
I have stored a video of the motor in the cloud for anyone to share or view. Hopefully the link below will take you there:
https://drive.google.com/file/d/11yIPp8 ... p=drivesdk
Re: Scuttle replacement advice needed. Slll Air portable 12v.
Looking very good I like your door tops. One of mine is damaged and I've been offered a pair for £50 I m night take that up as one of mine isn't worth repairing. Rivet counters are cringing. Jim
52HG42 my current love interest
Re: Scuttle replacement advice needed. Slll Air portable 12v.
Series 3 galvanised vent panel here for £475 if you're interested,wiper holes only,washers in bonnet.ta