DIY Tools. Who has the best to share!?

Any information on all other kit
User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

DIY Tools. Who has the best to share!?

Post by weetchus » Tue Jun 09, 2020 7:33 pm

Hi all. Thought I'd post the question:

WHO HAS COME UP WITH THE MOST INGENIOUS DIY TOOL ON THE GROUP?

I saw this video of this amazing DIY valve spring compression tool and thought... what else has been done?
https://youtu.be/cpLkEYGQbS0?t=302

My own poor contributions are this box spanner below for the wheel hubs and my method for getting the gearbox bellhousing and flywheel separated from each other (haha).
I'm thinking ideas for: Valve Guide Extractors, Valve insert driving methods and tools, bearing drifts... the list goes on.
Screen Shot 2020-06-09 at 2.29.53 pm.png
Screen Shot 2020-06-09 at 2.29.53 pm.png (1.16 MiB) Viewed 10056 times
Screen Shot 2020-06-09 at 2.32.16 pm.png
Screen Shot 2020-06-09 at 2.32.16 pm.png (2.8 MiB) Viewed 10056 times

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: DIY Tools. Who has the best to share!?

Post by removeduser185 » Tue Jun 09, 2020 8:19 pm

Not ingenious as it is merely a home-made version of a Land Rover tool, but it's my contribution to this thread. It's a device for compressing the spring in a steering relay in order to get the bushes on.
rebuilt steering relay 1.JPG
rebuilt steering relay 1.JPG (1.17 MiB) Viewed 10047 times

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Re: DIY Tools. Who has the best to share!?

Post by weetchus » Wed Jun 10, 2020 12:43 am

Hey Fred. I forgot that you inspired me to make one of these when I was doing my relay. Prob my first welding job... and you can tell.
Screen Shot 2020-06-09 at 7.43.12 pm.png
Screen Shot 2020-06-09 at 7.43.12 pm.png (761.25 KiB) Viewed 10034 times
Fred wrote: ↑
Tue Jun 09, 2020 8:19 pm
Not ingenious as it is merely a home-made version of a Land Rover tool, but it's my contribution to this thread. It's a device for compressing the spring in a steering relay in order to get the bushes on.

rebuilt steering relay 1.JPG

User avatar
longlegslandyman
Posts: 314
Joined: Sun Nov 15, 2015 11:54 am
Location: Herne Bay Kent

Re: DIY Tools. Who has the best to share!?

Post by longlegslandyman » Wed Jun 10, 2020 10:53 am

Have made many over the years and for differnt cars too .
This is a simple one made to hold the diff flange so I could remove the diff nut.
Attachments
Webp.net-resizeimage (5).jpg
Webp.net-resizeimage (5).jpg (1.03 MiB) Viewed 10014 times

User avatar
longlegslandyman
Posts: 314
Joined: Sun Nov 15, 2015 11:54 am
Location: Herne Bay Kent

Re: DIY Tools. Who has the best to share!?

Post by longlegslandyman » Wed Jun 10, 2020 10:59 am

Here,s another needed to hold the crankshaft pulley on a 200tdi so I could remove the nut to do a timing belt and water pump change.
Attachments
Webp.net-resizeimage (3).jpg
Webp.net-resizeimage (3).jpg (905.63 KiB) Viewed 10014 times

User avatar
longlegslandyman
Posts: 314
Joined: Sun Nov 15, 2015 11:54 am
Location: Herne Bay Kent

Re: DIY Tools. Who has the best to share!?

Post by longlegslandyman » Wed Jun 10, 2020 12:06 pm

This one was for the overhaul of the steering relay ,holds the spring compressed with the help of a couple of zip ties to hold them together ,so you can slide the shaft in and fit the cone bushes before you slide the lot in the housing.
Attachments
Webp.net-resizeimage (3).jpg
Webp.net-resizeimage (3).jpg (876.36 KiB) Viewed 10006 times

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Re: DIY Tools. Who has the best to share!?

Post by weetchus » Wed Jun 10, 2020 6:03 pm

Some great shares. Thank you. Keep em coming!

User avatar
longlegslandyman
Posts: 314
Joined: Sun Nov 15, 2015 11:54 am
Location: Herne Bay Kent

Re: DIY Tools. Who has the best to share!?

Post by longlegslandyman » Wed Jun 10, 2020 6:47 pm

Here,s another one not used for a lightweight unless like me your using a lt230 transfer box and I was too tight to stump up for the correct socket.
Attachments
diff nut.jpg
diff nut.jpg (19.89 KiB) Viewed 9987 times
nut socket.jpg
nut socket.jpg (21.58 KiB) Viewed 9987 times
Webp.net-resizeimage (4).jpg
Webp.net-resizeimage (4).jpg (969.73 KiB) Viewed 9987 times

Ridgy
Pastry Chef
Posts: 677
Joined: Fri Oct 03, 2014 12:35 pm
Location: Essex

Re: DIY Tools. Who has the best to share!?

Post by Ridgy » Wed Jun 10, 2020 7:07 pm

Some great ideas! Moral of the story seems to be.......never throw away your bits of scrap metal - they'll come in handy one day!
57 KB 58 1983 SIII GS Lightweight

User avatar
weetchus
Pastry Chef
Posts: 676
Joined: Wed Aug 15, 2018 3:15 pm

Re: DIY Tools. Who has the best to share!?

Post by weetchus » Thu Jun 11, 2020 7:34 pm

Let the hoarding continue.
We all have the Land Rover disease.

Ridgy wrote: ↑
Wed Jun 10, 2020 7:07 pm
Some great ideas! Moral of the story seems to be.......never throw away your bits of scrap metal - they'll come in handy one day!

Post Reply