Monty the rather rusty 2A - 37FG31
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
A bit of an update tonight as I’m busy over the weekend with various family duties..
Managed to strip the first door bottom:
The skin isn’t bad. Needs the bottom edge flap tidying up as it’s gone a bit wavy and thin in areas...but there’s plenty of thickness of the flap so I will trim off a mm or two and it should look nice and solid. There’s also a couple of dings to hammer out. Oh goody, more metalwork:
The frame suffers from the usual rot where water collects in the rear corner:
..buts that’s no problem because you can buy it by the metre:
I’ll try to get the jig made for the frame early next week, so I can cut out the rotten section and weld in new steel without it losing its shape. At least the old section is in one piece so I can use it as a template.
Hope you haven’t all given up on me.. I know it’s slow progress and I do like to waffle on..
All the best,
Andy
Managed to strip the first door bottom:
The skin isn’t bad. Needs the bottom edge flap tidying up as it’s gone a bit wavy and thin in areas...but there’s plenty of thickness of the flap so I will trim off a mm or two and it should look nice and solid. There’s also a couple of dings to hammer out. Oh goody, more metalwork:
The frame suffers from the usual rot where water collects in the rear corner:
..buts that’s no problem because you can buy it by the metre:
I’ll try to get the jig made for the frame early next week, so I can cut out the rotten section and weld in new steel without it losing its shape. At least the old section is in one piece so I can use it as a template.
Hope you haven’t all given up on me.. I know it’s slow progress and I do like to waffle on..
All the best,
Andy
Re: Monty the rather rusty 2A - 37FG31
Keep waffling on, since you’ve moved on to the door bottoms is the bulkhead finished ?andrewjsimpson1977 wrote: ↑Fri Sep 27, 2019 7:16 pmA bit of an update tonight as I’m busy over the weekend with various family duties..
Managed to strip the first door bottom:
2717C8D8-0C37-4B2E-BEE5-B4C80F90898D.jpeg
The skin isn’t bad. Needs the bottom edge flap tidying up as it’s gone a bit wavy and thin in areas...but there’s plenty of thickness of the flap so I will trim off a mm or two and it should look nice and solid. There’s also a couple of dings to hammer out. Oh goody, more metalwork:
3974B514-C169-47E6-ACF4-C9651C36A73F.jpeg
The frame suffers from the usual rot where water collects in the rear corner:
C5727F9E-C3C0-44C8-85BF-110EAD7D59BD.jpeg
..buts that’s no problem because you can buy it by the metre:
4EC8D2F3-A7AE-4FCA-AA1E-E05EB6907A06.jpeg
I’ll try to get the jig made for the frame early next week, so I can cut out the rotten section and weld in new steel without it losing its shape. At least the old section is in one piece so I can use it as a template.
Hope you haven’t all given up on me.. I know it’s slow progress and I do like to waffle on..
All the best,
Andy
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Er.. well... see... no. I have all the bits clamped up now, but I need someone to come round with their spot welder to stick it all together. I also have a bit more to do on the recesses, the new dremel cutting discs for which have now arrived. Maybe tomorrow (as the song goes..)
Andy
- removeduser185
- Cake Guru
- Posts: 3531
- Joined: Thu Jun 18, 2015 10:37 pm
Re: Monty the rather rusty 2A - 37FG31
Yes, keep waffling on - we're all thoroughly enjoying your restoration and will really miss it when it is finished. Reminds me, I must update my Shepherds' hut thread! Plenty happened, but the weather... God, it's been awful. Showers, on average 5 minutes apart. Go outside, drag power tools out, line up work... starts to rain, go inside again!
Re: Monty the rather rusty 2A - 37FG31
Andy,andrewjsimpson1977 wrote: ↑Sat Sep 28, 2019 9:51 pmEr.. well... see... no. I have all the bits clamped up now, but I need someone to come round with their spot welder to stick it all together. I also have a bit more to do on the recesses, the new dremel cutting discs for which have now arrived. Maybe tomorrow (as the song goes..)
Andy
I could bring mine to Newbury but you would have to return it to Bishop’s Stortford in 1 or 2 weeks if that helps..it has a 30a plug on it now but should run off 13a...
Howard
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
That is an incredibly generous offer. Would be happy to return it within a week if you are sure you can spare it?landylees wrote: ↑Sun Sep 29, 2019 2:47 pmAndy,andrewjsimpson1977 wrote: ↑Sat Sep 28, 2019 9:51 pmEr.. well... see... no. I have all the bits clamped up now, but I need someone to come round with their spot welder to stick it all together. I also have a bit more to do on the recesses, the new dremel cutting discs for which have now arrived. Maybe tomorrow (as the song goes..)
Andy
I could bring mine to Newbury but you would have to return it to Bishop’s Stortford in 1 or 2 weeks if that helps..it has a 30a plug on it now but should run off 13a...
Howard
Re: Monty the rather rusty 2A - 37FG31
I can manage without it for a week! I've still got to line up the bulkhead and doors before I spot weld the side panels.andrewjsimpson1977 wrote: ↑Sun Sep 29, 2019 6:27 pmThat is an incredibly generous offer. Would be happy to return it within a week if you are sure you can spare it?landylees wrote: ↑Sun Sep 29, 2019 2:47 pmAndy,andrewjsimpson1977 wrote: ↑Sat Sep 28, 2019 9:51 pmEr.. well... see... no. I have all the bits clamped up now, but I need someone to come round with their spot welder to stick it all together. I also have a bit more to do on the recesses, the new dremel cutting discs for which have now arrived. Maybe tomorrow (as the song goes..)
Andy
I could bring mine to Newbury but you would have to return it to Bishop’s Stortford in 1 or 2 weeks if that helps..it has a 30a plug on it now but should run off 13a...
Howard
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
You’re an officer and a gentleman, really appreciate that Howard.landylees wrote: ↑Sun Sep 29, 2019 10:32 pmI can manage without it for a week! I've still got to line up the bulkhead and doors before I spot weld the side panels.andrewjsimpson1977 wrote: ↑Sun Sep 29, 2019 6:27 pmThat is an incredibly generous offer. Would be happy to return it within a week if you are sure you can spare it?landylees wrote: ↑Sun Sep 29, 2019 2:47 pmAndy,andrewjsimpson1977 wrote: ↑Sat Sep 28, 2019 9:51 pmEr.. well... see... no. I have all the bits clamped up now, but I need someone to come round with their spot welder to stick it all together. I also have a bit more to do on the recesses, the new dremel cutting discs for which have now arrived. Maybe tomorrow (as the song goes..)
Andy
I could bring mine to Newbury but you would have to return it to Bishop’s Stortford in 1 or 2 weeks if that helps..it has a 30a plug on it now but should run off 13a...
Howard
Re: Monty the rather rusty 2A - 37FG31
Only thing I really need is a decent left hand IIA wing. If I end up having one made it is likely to cost £300 + VAT so would consider paying similar for NOS (and no doubt hand delivered by the pied piper riding a Unicorn but I can dream)andrewjsimpson1977 wrote: ↑Wed Sep 18, 2019 7:01 pmAnything you’re short of mate that I might have? Shout out as I’m bringing a couple of bits for Fred and Richard anyway so it’s no hassle.
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Right, it’s been another crazy week - but conscious of the need to get cracking I found some time this evening to spot weld on the first couple of panels to the bulkhead.
Trying to hold the welder at the angles needed to get the fascia panel spotted to the goalpost is, to be totally honest...an absolute bitch of a job. I wouldn’t recommend it hungover. I have had a couple of minor blow throughs but nothing that can’t be fixed.
Huge thanks to Howard for the loan of his welder - promise I will get some more done tomorrow!
Best regards,
Andy
Trying to hold the welder at the angles needed to get the fascia panel spotted to the goalpost is, to be totally honest...an absolute bitch of a job. I wouldn’t recommend it hungover. I have had a couple of minor blow throughs but nothing that can’t be fixed.
Huge thanks to Howard for the loan of his welder - promise I will get some more done tomorrow!
Best regards,
Andy