Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sat Jun 22, 2019 11:38 am

I wish we could have mate, it would have cost him over £500 as I don't think it would have been covered by the Isuzu warranty. :lol: It was unfortunately a case of having to suck it up as a dealership. The service manager and the boss got a bottle of JD each, I recieved a crate of beer, everyone learnt a valuable lesson, and I still get paid whatever I'm doing that day. A standing joke at work this week for any faults, especially of the electrical variety, has been, 'Have you checked for keys in the cubby box.'. :D

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 23, 2019 5:36 pm

Well it turns out Neil wasn’t the only one receiving beer this weekend. A trip to some old friends a few miles away in Hertfordshire saw a few too many scoops enjoyed last night. I won’t lie this put some serious limitations on the work I was up for today.

First I decided to strip the clutch pedal tower:

5838A5FF-973D-4FC6-B155-EF1497837A13.jpeg
5838A5FF-973D-4FC6-B155-EF1497837A13.jpeg (2.1 MiB) Viewed 2423 times

I got the master cylinder off, and the retaining pin that holds in the pedal shaft was driven out easily enough with a punch:

BF9718AE-8A99-4672-87CF-48D589C3F832.jpeg
BF9718AE-8A99-4672-87CF-48D589C3F832.jpeg (1.29 MiB) Viewed 2423 times

Unfortunately that’s where I could go no further, as despite my best efforts the shaft cannot be drifted out. I have resorted to drilling the thing out, but I’m about half way through it and have lost the will to live.

I did manage to get the circlips out from the rear propshaft, but admittedly I sort of cheated. I put a fresh cutting disc in the grinder and cut through the most accessible arms of the two universal joints, which then allowed access to the others. After the middle parts of the UJs then fell out, there was plenty of room to drift out the bearing caps, which in turn gave greater access to the circlips from both sides. Some careful prying with a screwdriver and some needle nosed pliers saw these little guys removed without too much fuss:

63B3BA85-5F30-4469-9336-A82B6AA3F3D1.jpeg
63B3BA85-5F30-4469-9336-A82B6AA3F3D1.jpeg (1.12 MiB) Viewed 2423 times

So finally I was able to clean up, anti rust and prime the rear prop:

D7264D75-505F-43A4-889E-33D443D7DC2A.jpeg
D7264D75-505F-43A4-889E-33D443D7DC2A.jpeg (967.25 KiB) Viewed 2423 times

It’s waiting for green paint which I’ll pick up tomorrow. I do still need to make some new seals for the sliding joints on both front the and rear shafts. Quite pleased with the progress, I'll get some more done tomorrow evening after work if there’s time.

This week I didn’t get through the list, but I did make some headway so not a total loss. What I need now is cake and a lie down.

Thats it for now,

Andy

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Jun 23, 2019 7:38 pm

andrewjsimpson1977 wrote: ↑
Sun Jun 23, 2019 5:36 pm
I did manage to get the circlips out from the rear propshaft, but admittedly I sort of cheated. I put a fresh cutting disc in the grinder and cut through the most accessible arms of the two universal joints, which then allowed access to the others. After the middle parts of the UJs then fell out, there was plenty of room to drift out the bearing caps, which in turn gave greater access to the circlips from both sides. Some careful prying with a screwdriver and some needle nosed pliers saw these little guys removed without too much fuss:
Definately cheating that is!

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 23, 2019 7:44 pm

AR4412 wrote: ↑
Sun Jun 23, 2019 7:38 pm
andrewjsimpson1977 wrote: ↑
Sun Jun 23, 2019 5:36 pm
I did manage to get the circlips out from the rear propshaft, but admittedly I sort of cheated. I put a fresh cutting disc in the grinder and cut through the most accessible arms of the two universal joints, which then allowed access to the others. After the middle parts of the UJs then fell out, there was plenty of room to drift out the bearing caps, which in turn gave greater access to the circlips from both sides. Some careful prying with a screwdriver and some needle nosed pliers saw these little guys removed without too much fuss:
Definately cheating that is!

Regards,
I'm sure you can let me off just this once 8-)

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Jun 23, 2019 7:58 pm

Well, go on then, as you have a hangover. :!

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Jun 25, 2019 7:03 pm

“So, you’re positive the paint will match the cap?”

“Oh, yes sir”

“Great”

BC719F99-4C78-40EB-ABB2-F3768321EDB6.jpeg
BC719F99-4C78-40EB-ABB2-F3768321EDB6.jpeg (865.52 KiB) Viewed 2354 times
3F2F9FB2-A550-487B-87AF-1FDAF702385B.jpeg
3F2F9FB2-A550-487B-87AF-1FDAF702385B.jpeg (893.61 KiB) Viewed 2354 times
D6D5BF55-011F-4860-BD10-11B99EE97A9B.jpeg
D6D5BF55-011F-4860-BD10-11B99EE97A9B.jpeg (1014.3 KiB) Viewed 2354 times
68D0BFDC-6662-47C7-BB9B-9C86FF856A1F.jpeg
68D0BFDC-6662-47C7-BB9B-9C86FF856A1F.jpeg (1.02 MiB) Viewed 2354 times
Lies.

Ok so it wasn’t DBG anyway, but I was hoping it would do. At least it’s an extra layer or two of protection until I can order some in.

I chased the new UJs.. should be here Friday. Tomorrow I hope to get the rest of the shaft remnants out of the clutch pedal.

Slow progress but the day job is getting all my attention at the moment.

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Jun 30, 2019 5:13 pm

After a very enjoyable late night nattering and I dare say having a few too many drinks with the neighbours I wasn’t really up to much today. I picked a job that therefore didn’t take need much coordination or brain power.. scraping the mixture of oil, grease, clay -and the physical embodiment of evil from the front diff housing.

03A72AEA-4DED-41DA-AC79-CA5F7C8642F1.jpeg
03A72AEA-4DED-41DA-AC79-CA5F7C8642F1.jpeg (1.2 MiB) Viewed 2246 times
5E2D2265-76F8-4C18-BA32-CEB6A14C43B8.jpeg
5E2D2265-76F8-4C18-BA32-CEB6A14C43B8.jpeg (1.28 MiB) Viewed 2246 times

There was a fair bit of surface rust too. After two baths in hot soapy water (hot tip, use laundry detergent as well as dish soap), a scrub down with white spirit, an assortment of wire brushes on a cordless drill, another hot soapy bath and a final rinse, it was time for some primer:

7EB352FC-67B0-4DB4-9A3C-9A14013EAD34.jpeg
7EB352FC-67B0-4DB4-9A3C-9A14013EAD34.jpeg (1.09 MiB) Viewed 2246 times

I also managed to drive the old pivot out of the clutch pedal housing earlier this week, and stripped the pedal into its component parts. Needless to say it needs a new pivot:

5149FD6F-9B1B-4D5F-8F9E-88BF294D9083.jpeg
5149FD6F-9B1B-4D5F-8F9E-88BF294D9083.jpeg (1001.56 KiB) Viewed 2246 times

The brake pedal is currently getting the same treatment. Well ok no it isn’t, I’m currently lying on the sofa watching the second episode of Chernobyl, but I’ve made a start on drilling it out. Both pedal towers, and their pedals need a soak in rust remover, but guess what? I’ve run out.

I have also fitted new UJs to the front prop, and will get the other one done in the next few days.

On order is now:

2x pedal pivots
More rust remover
More welding wire in anticipation of sorting the bulkhead
More black paint
DBG paint for the rear prop
Gaiters and jubilee clips for both props
More panels for the bulkhead (a nice chap on eBay is going to sell me some inner panels as my foot wells didn’t come with them)

..I’m hoping to have a productive week ahead. Tomorrow I’ll finish painting the diff and hopefully get it fitted.

That’s it from me for today,

Andy

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Monty the rather rusty 2A - 37FG31

Post by Loulou » Mon Jul 01, 2019 7:29 pm

Andy,

Pour votre information :
Sur ma LWT l'arbre de transmission avant , la partie côté boite de vitesse était un modele de SIII et la partie côté axe étant un modèle S2a.
Les joints U sont différents et avant de comprendre, j'en aie massacré un exemplaire neuf… :mrgreen:

Good luck in your work

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

User avatar
Loulou
Pastry Chef
Posts: 570
Joined: Wed Jul 04, 2018 12:12 pm
Location: France

Re: Monty the rather rusty 2A - 37FG31

Post by Loulou » Mon Jul 01, 2019 7:30 pm

Andy,

For your information :
On my LWT the front drive shaft, the gear box side was a SIII model and the shaft side part was a S2a model.
U joints are different and before understanding, I slaughtered a new copy ...: Mrgreen:

Good luck in your work

Looloo
27GJ77 - 1977 LWT SIII FFR - 1st. Royal Horse Artillery - B Battery (BAOR)

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Mon Jul 01, 2019 10:22 pm

Loulou wrote: ↑
Mon Jul 01, 2019 7:30 pm
Andy,

For your information :
On my LWT the front drive shaft, the gear box side was a SIII model and the shaft side part was a S2a model.
U joints are different and before understanding, I slaughtered a new copy ...: Mrgreen:

Good luck in your work

Looloo
That sounds frustrating Lou.. someone must have mixed up an early long section with a later short..or vice versa. I'm looking forward to finishing the propshafts, which were nowhere near as easy to do as they shouldn't been. Just like everything else on this confounded wagon. :D

Post Reply