Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Jun 20, 2019 9:15 pm

AR4412 wrote: ↑
Thu Jun 20, 2019 8:44 pm

If all else fails, you can pop over and borrow my plasma cutter.
I mean, cool... but I'm not sure I could promise not to use it for nefarious purposes 8-)

Thanks for the tips matey, I was thinking earlier today it is about time I bought a Dremel, as it would probably help with the bulkhead repairs too.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Thu Jun 20, 2019 9:37 pm

landylees wrote: ↑
Thu Jun 20, 2019 9:12 pm

I have the same problem....i have left mine rotting on the workshop floor in disgust
There needs to be some sort of community support group set up to help the victims of circlips. We could meet on a Thursday evening and - while self-medicating heavily - throw propshafts into a canal.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 21, 2019 6:29 pm

Well it’s been a day for realising I’ve done wrong...

Firstly, I seem to have mixed my photos up. The front prop was actually black, and the rear green. This seems in line with Fred and Neil’s, so I’m going with it. And as it happens I have some black paint so let’s get the bits painted:

3A1CE151-EDF8-48AE-BE1A-AD743F59537A.jpeg
3A1CE151-EDF8-48AE-BE1A-AD743F59537A.jpeg (699.76 KiB) Viewed 2049 times

The inner surfaces where the new bearing caps are pressed in have been cleaned up / deburred with a grinding stone. Ahhhh. Lovely.

Now I can press in the beari..WHAT THE HELL?!? I seem to have ordered 82mm UJs, instead of the 75mm ones needed. (Cue swearing for a few minutes, talk among yourselves)

All the online resources seemed to say it should be 82mm, but the caps would stick out so far I couldn’t even get the circlips in. A quick measure of the old ones (which let’s face it I should’ve done to start with) shows the correct size and now it’s too bloody late to get any in for this weekend.

I’m going for a beer, that is all.

Andy

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Jun 21, 2019 6:41 pm

chipbury wrote: ↑
Sun Feb 12, 2017 8:55 pm
I need to find out if I have 82mm or 75mm UJ's in my propshafts - it would be lovely if you could tell me!
More embarrassing still, Chris predicted this way back in Feb 2017. Chris well done Nostradamus!

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Monty the rather rusty 2A - 37FG31

Post by landylees » Fri Jun 21, 2019 8:04 pm

andrewjsimpson1977 wrote: ↑
Fri Jun 21, 2019 6:41 pm
chipbury wrote: ↑
Sun Feb 12, 2017 8:55 pm
I need to find out if I have 82mm or 75mm UJ's in my propshafts - it would be lovely if you could tell me!
More embarrassing still, Chris predicted this way back in Feb 2017. Chris well done Nostradamus!
....Howard quietly disappears to the back of this workshop with a ruler to where his bearings have been sitting in their boxes for 2 years....
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Fri Jun 21, 2019 10:45 pm

landylees wrote: ↑
Fri Jun 21, 2019 8:04 pm
andrewjsimpson1977 wrote: ↑
Fri Jun 21, 2019 6:41 pm
chipbury wrote: ↑
Sun Feb 12, 2017 8:55 pm
I need to find out if I have 82mm or 75mm UJ's in my propshafts - it would be lovely if you could tell me!
More embarrassing still, Chris predicted this way back in Feb 2017. Chris well done Nostradamus!
....Howard quietly disappears to the back of this workshop with a ruler to where his bearings have been sitting in their boxes for 2 years....
We should have a separate thread for embarrassing events/activities! Today I was helping my neighbour get a spark on my Land ROver. I was watching for the spark while he was turning the engine over on the starting handle. No spark. More cranking. No spark. Eventually, I remembered I had forgotten to, as asked, turn the ignition on! Got a spark then! Neighbour enjoyed the extra cranking under the hot sun!

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 22, 2019 8:01 am

:lol: Classic. At least it was him and not you :oops:

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sat Jun 22, 2019 9:04 am

andrewjsimpson1977 wrote: ↑
Fri Jun 21, 2019 6:41 pm
chipbury wrote: ↑
Sun Feb 12, 2017 8:55 pm
I need to find out if I have 82mm or 75mm UJ's in my propshafts - it would be lovely if you could tell me!
More embarrassing still, Chris predicted this way back in Feb 2017. Chris well done Nostradamus!
I can't remember which size I ordered now - I'd better go and check the box!
2A - 39 FG 70

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sat Jun 22, 2019 10:48 am

andrewjsimpson1977 wrote: ↑
Fri Jun 21, 2019 6:29 pm
Well it’s been a day for realising I’ve done wrong...

....Now I can press in the beari..WHAT THE HELL?!? I seem to have ordered 82mm UJs, instead of the 75mm ones needed. (Cue swearing for a few minutes, talk among yourselves)
Fred wrote: ↑
Fri Jun 21, 2019 10:45 pm
We should have a separate thread for embarrassing events/activities! Today I was helping my neighbour get a spark on my Land ROver. I was watching for the spark while he was turning the engine over on the starting handle. No spark. More cranking. No spark. Eventually, I remembered I had forgotten to, as asked, turn the ignition on! Got a spark then! Neighbour enjoyed the extra cranking under the hot sun!
Your not alone gents. Stick with me on this rambling tale, and you will laugh at the end. I did. Eventually.

Customer brings back his week old/500 mile D-Max as the keyless ignition was playing up and the vehicle intermittantly not starting, throwing a no electronic key warning on the dash display. Also the keyless entry wouldn't work, same warning when trying to lock the vehicle via the keyless door button, but central locking would lock/unlock the car. Putting the keys on the back seat would result in the ignition going live every time the stop/start button was pressed. Okay, looks like a PESS (Passive Entry Start System) reciever fault. A diagnostics sweep showed no faults and everything to be okay. Strip out the dash centre of trim/heater controls/vents/stereo head unit etc, swap the reciever removed from a sales vehicle in the lot. No change in fault. Speak to Isuzu Technical Assist, and there's a known wiring fault on the reciever harness due to an overtightened cable tie changing the resistance in the wires. Cable tie doesn't seem tight and wires seem okay, loosen cable tie just to be safe. No change in fault. Take out instrument cluster as PESS control module is behind it, remove the module and unplug connector to do resistance check on the wires to the reciever., All okay. Mmmm? Move reciever to below stereo unit, works better but still intermittant dead spots in the car. If you sat with the handset on either pocket, or placed them in the cup holder you would get the intermittant fault, anywhere near the dash and the system semed to work okay. Try the door handle sytem, works okay If you put the handset between the door handle and door but not if outside of the door handle, (The door handle antenna has an 80cm range.) It works okay if you put both handsets together. Mmmm? Looks like a PESS module fault. Speak to Assist again, they agree that the module is the most likely cause. Have a thought. There are three RF recievers in the vehicle, one in the dash, one below the cubby box, and one behind the rear seats. Maybe the central reciever is faulty, although when placing the keys on the floor behind the cubbybox the system works okay. Remove trim from around gearlever and it's plug is connected. Okay, Ill swap it from another car to check. Empty the cubbybox to get the the two console mounting screws in there and what do I find below three torches, house keys, sweets and all the receipts? A Defender alarm fob. Oh god, please, no. Place the fob outside the vehicle one meter away. Keyless entry and locking works and vehicle ignition button responds to handset no matter where you put it in the vehicle, even works with it held outside the door. Oh god, please, No! Put Defender fob back in cubbybox, where it is directly above the central reciever, car goes back to being intermittantly faulty. Oh god, No! Take Defender fob away, car works perfectly. OH GOD! NO! It cannot be as simple as that, surely? Yes, it b####y well can. Cue seven hours of work, much wailing and gnashing of teeth, and a waste of my day for a key fob. :roll:

Well, you have to laugh.

Thanks for sticking with me, you can have your thread back now Andy.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sat Jun 22, 2019 11:19 am

That is priceless Neil, thanks for sharing that. Assume you still charged the customer for the seven hours :lol:

At least we all now have a great practical joke to play on Izusu drivers.

Post Reply