Rattler's 2a civvy restoration project

Tell us about any of your Land Rover related projects here.
aerialphil
Posts: 136
Joined: Sun Apr 22, 2012 12:43 pm

Re: Rattler's 2a civvy restoration project

Post by aerialphil » Sun Mar 10, 2019 12:06 am

Looking good but I think you should paint the chassis inside and out as Scumbags will see your new chassis and want it also galv is only 70 microns thick and I have seen very rusty ones that have been left bare. Phil

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Sun Mar 10, 2019 12:33 am

aerialphil wrote: ↑
Sun Mar 10, 2019 12:06 am
Looking good but I think you should paint the chassis inside and out as Scumbags will see your new chassis and want it also galv is only 70 microns thick and I have seen very rusty ones that have been left bare. Phil
Yeah the thing is with the rolling chassis being housed in the garage its fading real slow and if i was to use stuff that speeds up the process up, can't think what its called i would have to remove the engine and box again and other stuff but i really like the galv look but i do plan to paint the rear X member once its faded enough :)
---------------
Graham

landylees
Pastry Chef
Posts: 639
Joined: Mon Jan 29, 2018 8:43 pm
Location: Bishops Stortford

Re: Rattler's 2a civvy restoration project

Post by landylees » Mon Mar 11, 2019 6:56 pm

Cornish Rattler wrote: ↑
Sun Mar 10, 2019 12:33 am
aerialphil wrote: ↑
Sun Mar 10, 2019 12:06 am
Looking good but I think you should paint the chassis inside and out as Scumbags will see your new chassis and want it also galv is only 70 microns thick and I have seen very rusty ones that have been left bare. Phil
Yeah the thing is with the rolling chassis being housed in the garage its fading real slow and if i was to use stuff that speeds up the process up, can't think what its called i would have to remove the engine and box again and other stuff but i really like the galv look but i do plan to paint the rear X member once its faded enough :)
Mordant Solution - T Wash will dull/etch the galvanised for painting if that is what you want to do.
1965 Series IIA 88" 200tdi
1968 Series IIA LWT 12v GS RHD [34-FG-95]
1976 Series III LWT 24v FFR RHD [45-GF-53]

Cornish Rattler
Posts: 461
Joined: Tue Jan 30, 2018 12:53 am

Re: Rattler's 2a civvy restoration project

Post by Cornish Rattler » Tue Mar 12, 2019 12:06 am

landylees wrote: ↑
Mon Mar 11, 2019 6:56 pm
Cornish Rattler wrote: ↑
Sun Mar 10, 2019 12:33 am
aerialphil wrote: ↑
Sun Mar 10, 2019 12:06 am
Looking good but I think you should paint the chassis inside and out as Scumbags will see your new chassis and want it also galv is only 70 microns thick and I have seen very rusty ones that have been left bare. Phil
Yeah the thing is with the rolling chassis being housed in the garage its fading real slow and if i was to use stuff that speeds up the process up, can't think what its called i would have to remove the engine and box again and other stuff but i really like the galv look but i do plan to paint the rear X member once its faded enough :)
Mordant Solution - T Wash will dull/etch the galvanised for painting if that is what you want to do.

Yeah it is getting there slowly and because i'm starting to do work on the bodywork now which means leaving the back end of the chassis hanging out of the garage to work on the tub in front of the landy the rear X member is getting weathered :)
---------------
Graham

aerialphil
Posts: 136
Joined: Sun Apr 22, 2012 12:43 pm

Re: Rattler's 2a civvy restoration project

Post by aerialphil » Fri Mar 15, 2019 11:53 pm

I would paint everything you can especially inside as I bought a 90 with a galv chassis which was very badly corroded. Also on the Landrover tool box video's the guy buys a rusty landrover with a galv chassis. People think it's bomb proof but some road salt and mud will soon take it off. It's not as robust as you think 70 microns is all it is. Stones will hit it, off road scrapes, and atmospheric pollution corrodes it away. Raptor bed liner spray would be the best coating. phil

aerialphil
Posts: 136
Joined: Sun Apr 22, 2012 12:43 pm

Re: Rattler's 2a civvy restoration project

Post by aerialphil » Fri Mar 15, 2019 11:59 pm

I would paint everything you can especially inside as I bought a 90 with a galv chassis which was very badly corroded. Also on the Landrover tool box video's the guy buys a rusty landrover with a galv chassis. People think it's bomb proof but some road salt and mud will soon take it off. It's not as robust as you think 70 microns is all it is. Stones will hit it, off road scrapes, and atmospheric pollution corrodes it away. Raptor bed liner spray would be the best coating. phil
    Wouldn't take long to lift engine and gear box

    User avatar
    longlegslandyman
    Posts: 314
    Joined: Sun Nov 15, 2015 11:54 am
    Location: Herne Bay Kent

    Re: Rattler's 2a civvy restoration project

    Post by longlegslandyman » Sat Mar 16, 2019 9:18 am

    Great work glad to see another landrover being saved ,keep the updates coming there good to see and follow.
    All the best
    paul

    Cornish Rattler
    Posts: 461
    Joined: Tue Jan 30, 2018 12:53 am

    Re: Rattler's 2a civvy restoration project

    Post by Cornish Rattler » Sat Mar 16, 2019 6:03 pm

    aerialphil wrote: ↑
    Fri Mar 15, 2019 11:59 pm
    I would paint everything you can especially inside as I bought a 90 with a galv chassis which was very badly corroded. Also on the Landrover tool box video's the guy buys a rusty landrover with a galv chassis. People think it's bomb proof but some road salt and mud will soon take it off. It's not as robust as you think 70 microns is all it is. Stones will hit it, off road scrapes, and atmospheric pollution corrodes it away. Raptor bed liner spray would be the best coating. phil
      Wouldn't take long to lift engine and gear box
      Thanks for the advice and I do really appreciate it but its dragging on now and after 3 yrs of doing this project i just want to get it finished now as i've not had wheels for the same length of time either so i will leave the chassis as it is and keep my eye on it :)
      ---------------
      Graham

      Cornish Rattler
      Posts: 461
      Joined: Tue Jan 30, 2018 12:53 am

      Re: Rattler's 2a civvy restoration project

      Post by Cornish Rattler » Sat Mar 16, 2019 6:19 pm

      longlegslandyman wrote: ↑
      Sat Mar 16, 2019 9:18 am
      Great work glad to see another landrover being saved ,keep the updates coming there good to see and follow.
      All the best
      paul

      Cheer's longlegslandyman this will be my 4th series i've owned had a couple of Disco's and a Def which with the Def i just couldn't get to grips with even though i had it for 4 yrs and done loads of work on it inc a new galv chassis and replacement bulkhead i decided on selling the 90 mainly to pay for son's wedding and buy another 2a which i've really enjoyed doing but really want to get back on the road now before i forget how to drive :D
      ---------------
      Graham

      Cornish Rattler
      Posts: 461
      Joined: Tue Jan 30, 2018 12:53 am

      Re: Rattler's 2a civvy restoration project

      Post by Cornish Rattler » Mon Mar 18, 2019 5:58 pm

      Not much to report just been digging out some of the old bits n bobs that was buried in a corner of the garage not being refitted but to jog my memory to order new / referbed parts ready for when we paint all the bodywork in the next few weeks :D
      ---------------
      Graham

      Post Reply