My steering relay came out after alternating between a lot of heat and WD40 over a number of days, interspersed with applying gradually increasing pressure using a large puller (see link below).weetchus wrote: ↑Wed Jan 02, 2019 3:02 pmI then got everything off except the annoying steering relay which is firmly jammed in place.
Screen Shot 2019-01-02 at 10.07.43 am.png
I have tried:
WD-40, Diesel and Freeze-Off to lubricate it.
Putting a jack underneath the chassis and, because there is no engine weight or body to hold the chassis down, I put a scaffold prop beside the relay unit and against the ceiling! Jacking from below only started to bend the chassis rather than move the relay!!!! As there are already cracks around the relay I stopped.
I've hit it with a hammer and drift... everything.
any tips?
I can't really afford a new Richard's Chassis as it would cost me the £1,500 plus another £500 to ship, plus another 35% tax, plus VAT. So... I am investigating having an engineering company look at the chassis once it is sand blasted to see if they can replicate the good condition LHD side, but mirror-flipped to my RHD needs. We shall see. Quote may end up cheaper.
Screen Shot 2019-01-02 at 10.20.58 am.png
viewtopic.php?f=6&t=6424&start=10