A couple of bits to report on:
The remnants of the tub frame has been soaked in paraffin (the rags help to keep it on the surface rather than running off), to get rid of the last of the bitumastic. You can see the bitumen soaking into the rag - it’s really effective if quite a slow process. It took about 3 hours of repeated soaking and fresh rags, and I would still like to give it a final clean with white spirit tomorrow to be totally happy.

- A1EEC822-6D6D-4C22-A23D-CC7E4D39E6B1.jpeg (1.69 MiB) Viewed 2403 times

- A7AF0E1C-003F-4610-8E84-9C1B372E1213.jpeg (1.52 MiB) Viewed 2403 times
Removing the underseal has also revealed a couple of small dents which will be tapped back to flat in the morning. I’m also happy to report the rivets have arrived for the first few bits of the tub rebuild, so hopefully I can get the floor and front valance panel fastened in sometime next week.
Also, I won a couple of bonnet strap mounts cheap on eBay which were mislabelled as tub tie downs:

- 28C14375-3328-4BA6-8BA6-4A545175A797.jpeg (865.94 KiB) Viewed 2403 times
I need to find a third (if anyone has one spare I’ll happily exchange for beer tokens) to complete the set. I need the centre staple too, but suspect that might be one for the stalls at this year’s shows.
That’s it for now,
Andy