Landrover 101 project

Tell us about any of your non-Land Rover projects here. These may be military or non-military, motorbikes, cars, lorries, planes etc. It's interesting to see what others have in their collections and what they are working on besides their Land Rover(s).
Post Reply
BOMBER71
Pastry Chef
Posts: 524
Joined: Thu Jul 25, 2013 12:47 pm
Location: BLANDFORD DORSET

Re: Landrover 101 project

Post by BOMBER71 » Sat Sep 22, 2018 6:56 pm

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
series 2a lightweight 40 FG 24. Landrover wolf 90 LN 92 AA Landrover 101 24v FFR 74 FL 87 EX 12AD RAPIER LAUNCHER. Landrover 101 12v RHD 73 FL 30 EX 7 PARA

BOMBER71
Pastry Chef
Posts: 524
Joined: Thu Jul 25, 2013 12:47 pm
Location: BLANDFORD DORSET

Re: Landrover 101 project

Post by BOMBER71 » Sat Sep 22, 2018 7:07 pm

Just done a deal and purchased these two 101 that were cast in 1996 and still have there auction lot numbers visible on the windscreens . Both RHD and fitted with winches one 12v and the other 24v . The 12v is ex 7 RHA and fitted with SA80 rifle clips and the 24v is ex 12 RA . Amazing to find two original untouched trucks 22 years after release ! I think i will be spending a few hours in the workshop this winter !
series 2a lightweight 40 FG 24. Landrover wolf 90 LN 92 AA Landrover 101 24v FFR 74 FL 87 EX 12AD RAPIER LAUNCHER. Landrover 101 12v RHD 73 FL 30 EX 7 PARA

Grapelli746
Posts: 93
Joined: Fri Jul 07, 2017 11:31 pm
Location: Bournemouth

Re: Landrover 101 project

Post by Grapelli746 » Wed Oct 03, 2018 7:23 am

Hi Martin,

As you say, amazing that these have been stood untouched for such a long time! Looks like you have taken on a lot more work this time though! Is this the cheapest way to buy winches? 😂
Regards,

Steve

1971 (J) Series 2A 88"
1980 (V) Series 3 LWT
2004 Defender 110 (TD5)
2007 Range Rover Sport HSE

User avatar
Trickyh
Posts: 293
Joined: Mon Aug 21, 2017 1:17 pm
Location: Reading, Berks

Re: Landrover 101 project

Post by Trickyh » Wed Oct 03, 2018 9:47 am

Blimey, you have got your work cut out there mate. I kept parking next to those two when I sorted out my rear leaf springs. Hope you got them for a good price! I was too afraid to ask him in case I had another dream shattered! 8-)

Rich
Rich aka Tricky

'72 SIII 12V GS Lightweight
Sankey

BOMBER71
Pastry Chef
Posts: 524
Joined: Thu Jul 25, 2013 12:47 pm
Location: BLANDFORD DORSET

Re: Landrover 101 project

Post by BOMBER71 » Fri Oct 05, 2018 1:11 am

24 volt one arrived today along with spare doors and tops and loads of other parts . Engine turns over with the starting handle .Connnected two batteries and have rear ,side,and indicators working plus horn.wipers and windscreen washers amazing after such along time .Have had chance to go over more thoroughly and i am very pleased with what i see ,yes rear crossmember will need to be replaced and oops my finger went through the fuel tank but overall these vehicles are straight and sound .Remember never judge a book by its cover ! Two of us managed to roll this one easily into the barn which is another good sign.12 volt one arrives tomorrow so into the workshop that one will go .
series 2a lightweight 40 FG 24. Landrover wolf 90 LN 92 AA Landrover 101 24v FFR 74 FL 87 EX 12AD RAPIER LAUNCHER. Landrover 101 12v RHD 73 FL 30 EX 7 PARA

User avatar
Sidders101
Bake Off Judge
Posts: 2406
Joined: Wed Apr 02, 2014 7:57 pm
Location: Winchester

Re: Landrover 101 project

Post by Sidders101 » Fri Oct 05, 2018 7:01 pm

Peach mate..so chuffed you both have these belters in your capable hands....well deserved.
Sidders


1974 Series 3 LWT 12v RHD 69-FM-24 , Royal Marines ("Intrepid")
1976 101 forward control gun tractor 12v RHD- 73-FL-43 ex 1,2 & 3 Para ("Kryten")
1979 Sankey NT Trailer 06-HF-86 78 Engr Reg (Herman)
1978 Trophy Frank Spencer impression (1st place)

User avatar
danster
Posts: 489
Joined: Wed Jul 25, 2012 5:23 pm
Location: Blackpool

Re: Landrover 101 project

Post by danster » Fri Oct 05, 2018 9:04 pm

BOMBER71 wrote: ↑
Fri Oct 05, 2018 1:11 am
24 volt one arrived today along with spare doors and tops and loads of other parts . Engine turns over with the starting handle .Connnected two batteries and have rear ,side,and indicators working plus horn.wipers and windscreen washers amazing after such along time .Have had chance to go over more thoroughly and i am very pleased with what i see ,yes rear crossmember will need to be replaced and oops my finger went through the fuel tank but overall these vehicles are straight and sound .Remember never judge a book by its cover ! Two of us managed to roll this one easily into the barn which is another good sign.12 volt one arrives tomorrow so into the workshop that one will go .
Yep jealous as chuff! Try not to rub it in too much!
I’ve bought a project not Land Rover related, a 1971 triumph gt6 god I wish I’d bought a Land Rover of some sort can’t get in and out of it never mind underneath!
Congrats you have the stuff some of us can only dream of
Top Cocker and Bodger

BOMBER71
Pastry Chef
Posts: 524
Joined: Thu Jul 25, 2013 12:47 pm
Location: BLANDFORD DORSET

Re: Landrover 101 project

Post by BOMBER71 » Sat Oct 06, 2018 9:45 pm

Trickyh wrote: ↑
Wed Oct 03, 2018 9:47 am
Blimey, you have got your work cut out there mate. I kept parking next to those two when I sorted out my rear leaf springs. Hope you got them for a good price! I was too afraid to ask him in case I had another dream shattered! 8-)

Rich
Well both myself and my mate got alot of stick on 101FC facebook about these trucks and what we paid for them .One person suggested that as i would not admit then i must have paid too much! Another said 1 p over scrap price was too much.Well complete nokken winches are now worth around 2k each and the last complete on on ebay at 1.8k was only on for hours .I do not mind admitting on here that the price was just over the 4k each so it you take the winches value off then just over 2k for the trucks .I budgeted too spend around 3k a truck on parts but will probably be well below as the seller has allowed me to cherry pick his amazing collection of parts at very fair prices .For example I had budgeted £1100 for two canvases from undercovers .However coming with the trucks are two original mint take off canvases for £100 each.Both trucks have arrived with their original cast papers from the mod and the original yellow and black key tags with the military reg stamped on .How many lightweight owners on here can say that they have their original cast papers and key tabs ? Having had chance to look over the trucks today in more detail a few more interesting details have come to light .The 24v truck which is the one on the right of the pictures has a line of metal studs across the front and clips on the side of the cab so was clearly winterised at some point to take snow blinds.The inside of the doors and footwells etc were lined with Rhino hind to act as insulation and to reduce condensation in the cold .Unlike winterised lightweights 101s did not need the artic heaters as anyone who has driven one knows that you only have to undo the zip on the gearstick gaitor to allow hot air straight off the engine into the cab.This one is chassis number 018 and i already have number 036 ,for those that do not know only 158 RHD 24v GS were built ! nearly 40 were later rebuilt as Radio bodies and a few were lost on the Atlantic conveyor when it went down.The 12volt has a nice little in service repair on the front of the cab and there is also evidence that it may have had a hard parachute landing with 7 para.Inside the passenger footwell SA80 rifle clips have been fitted so will probably have to think about keeping these even though i despised the rifle when it was first introduced and preffered to always draw an SLR from the armoury.
series 2a lightweight 40 FG 24. Landrover wolf 90 LN 92 AA Landrover 101 24v FFR 74 FL 87 EX 12AD RAPIER LAUNCHER. Landrover 101 12v RHD 73 FL 30 EX 7 PARA

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Landrover 101 project

Post by andrewjsimpson1977 » Sat Oct 06, 2018 9:59 pm

Oh god I’m getting the itch again... thanks for the update Martin.. I hope you are considering doing at least one of these beauties long term.

Andy

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Landrover 101 project

Post by removeduser185 » Sat Oct 06, 2018 10:23 pm

I think you can be well satisfied with your purchases. I'll bet they aren't as bad as they appear, Army paint soon looks shabby and, once the panels are cleaned up they'll look fine. Yes, there will be a lot more to the rebuild than painting the panels, of course there will, and I expect, all up, they'll cost more than an additional £3000 to finish. But, when they are finished, they'll be worth a lot more than you'll have paid. More to the point, they'll give you a great deal of satisfaction. I can't justify (or afford) to own one, but would if I could. If you go for the "in service" look, you can always use a Lightweight radiator grille - there's a lovely picture of one in one of the books with just such a grille! Not sure that the suggestion that one of them had a hard parachute landing is a great selling point though!

As for key fobs... well, some Lightweight owners have the original unit-made key fobs. Proof, I think that mine isn't the work of a PO - or at least not an enthusiast PO is the fact that the bugger couldn't even get the stamp for the "4" up the right way! So I'll go with bored soldier rather than PO!
Keys.jpg
Keys.jpg (367.13 KiB) Viewed 11322 times

Post Reply