Monty the rather rusty 2A - 37FG31
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Thanks Mac, happy to report the sander still lives though. ‘Roy Orbital’ is my trusty sidekick these days - I don’t think I’d want to go on without him to be honest.
So... driven on by horrible dreams of ill-fitting panels and welds that don’t stick, I had a bit of an early start this morning..
Panels very basically tacked in place..
The edge seams are still missing from the inner side panels, and of course large sections of the fascia..
Alignment seems good, except for the driver’s side inner side panel, which needs some re-bending to make it line up properly with the new footwell. I’ll sort this in due course..
From this angle you can clearly see the dash box that needs a new top. Should be easy to stick a new one in with the ‘hot metal glue gun’, just need to do a bit of tidying up of the inner surfaces of the box first.
Generally pretty happy with the progress. Today I had to start early as I’m heading off to London later with Sara - we are runing in the Royal Parks Half Marathon tomorrow (not quickly I might add!). We are running to raise money for the Royal Brompton Hospital, which some months ago gave Sara a potentially life-saving operation to fit a pacemaker. She suffers from a rare disorder which makes her heart rate drop without warning. This lead to several injuries including a nasty landing on the cutlery tub of the dishwasher. Not fun times. Glad to say it’s all behind her now, but the hospital (which has one of the handful of specialist labs to help with this condition in the country) is unbelievably on the government’s at risk list for closure due to lack of funding. You can, if you are interested read about Sara’s story here https://www.justgiving.com/fundraising/ ... at-running - or even (cough) donate to the cause if you like (sorry for the shameless plug). If nothing else, you can at least have a good laugh at the photo of me looking like Benny from ‘Crossroads’.
See you guys next week for more hitting of metal things with a hammer and swearing.
All the best,
Andy
So... driven on by horrible dreams of ill-fitting panels and welds that don’t stick, I had a bit of an early start this morning..
Panels very basically tacked in place..
The edge seams are still missing from the inner side panels, and of course large sections of the fascia..
Alignment seems good, except for the driver’s side inner side panel, which needs some re-bending to make it line up properly with the new footwell. I’ll sort this in due course..
From this angle you can clearly see the dash box that needs a new top. Should be easy to stick a new one in with the ‘hot metal glue gun’, just need to do a bit of tidying up of the inner surfaces of the box first.
Generally pretty happy with the progress. Today I had to start early as I’m heading off to London later with Sara - we are runing in the Royal Parks Half Marathon tomorrow (not quickly I might add!). We are running to raise money for the Royal Brompton Hospital, which some months ago gave Sara a potentially life-saving operation to fit a pacemaker. She suffers from a rare disorder which makes her heart rate drop without warning. This lead to several injuries including a nasty landing on the cutlery tub of the dishwasher. Not fun times. Glad to say it’s all behind her now, but the hospital (which has one of the handful of specialist labs to help with this condition in the country) is unbelievably on the government’s at risk list for closure due to lack of funding. You can, if you are interested read about Sara’s story here https://www.justgiving.com/fundraising/ ... at-running - or even (cough) donate to the cause if you like (sorry for the shameless plug). If nothing else, you can at least have a good laugh at the photo of me looking like Benny from ‘Crossroads’.
See you guys next week for more hitting of metal things with a hammer and swearing.
All the best,
Andy
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Speaking of swearing - got back from the half marathon to this - both front windows done. No good deed goes unpunished eh? Had to drive back on the A roads in the peeing rain. I will be having a few drinks tonight. You couldn’t write it could you.
Re: Monty the rather rusty 2A - 37FG31
Sorry to see that photo Andy - apart from the utter outrage you feel it's the hassle of having to deal with the aftermath that is such a pain in the a%$£.
2A - 39 FG 70
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
You are not wrong mate - Admital insurance didn’t want to know - said it was an issue for auto glass and weren’t interested in how the hell I get home in a car full of glass (autoglass not available today). Green ‘Chocolate bloody fireguard’ Flag said not a recoverable problem, again saying it’s autoglass’s problem. Both will be getting kicked into touch tomorrow when I can be bothered to do the ringing round.
I have alcohol now though so had better sign off before I get ranty.
-
Treehugger
Re: Monty the rather rusty 2A - 37FG31
Bad end to a great day Andy. Give the insurance companies hell mate and let them know your also going to tell the world on social media about the quality of service etc. Watch them squirm and jump up and down about that. Twitter is good for that too you know. Just saying. Like they don't get mad, get even!
Re: Monty the rather rusty 2A - 37FG31
#######!
That pic has saddened me mate.
Regards,
That pic has saddened me mate.
Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
'First my weapon. Then my equipment. Then myself.'
Neil.
09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Thanks fellas, we have Autoglass coming out to fix it this week, so apart from a bit of a hoovering job it’ll soon be a memory.
I ordered a new jigsaw this morning to finish off the dash repair - I’m a fickle creature and know exactly how to cheer myself up. Need to think of a way to make Sara’s day easier now, as she is having to walk in the rain to do the school run while the car is out of action. My crystal ball has a full on takeaway in it
All the best,
Andy
I ordered a new jigsaw this morning to finish off the dash repair - I’m a fickle creature and know exactly how to cheer myself up. Need to think of a way to make Sara’s day easier now, as she is having to walk in the rain to do the school run while the car is out of action. My crystal ball has a full on takeaway in it
All the best,
Andy
Re: Monty the rather rusty 2A - 37FG31
just seen the pic mate, absolute scum some people... funny companies are quick to take your money... not so quick to spend theirs when it goes wrong!
Rob.
Chairman and Webmaster.
1972 Series III Lightweight GS 200Tdi
----------------------------------------------------------
Chairman and Webmaster.
1972 Series III Lightweight GS 200Tdi
----------------------------------------------------------
Re: Monty the rather rusty 2A - 37FG31
Sorry to hear about your car andy, strange thing is your the second one this weekend I know of that's had both front windows done.
If only you could catch the bastard's, if only.
If only you could catch the bastard's, if only.
Graham.
Gatwick, west Sussex
Buy British, now it's more important than ever.
1980-83 GS Lightweight 57KB99
Sankey narrow track 08ES81
1942 350cc Ohv Ariel W'ng dispatch bike
Gatwick, west Sussex
Buy British, now it's more important than ever.
1980-83 GS Lightweight 57KB99
Sankey narrow track 08ES81
1942 350cc Ohv Ariel W'ng dispatch bike
-
andrewjsimpson1977
- Cake Guru
- Posts: 3613
- Joined: Tue Aug 11, 2015 3:31 pm
- Location: Befordshire
Re: Monty the rather rusty 2A - 37FG31
Thanks Rob & Graham, indeed if I had managed to catch the s*#t at it yesterday, but then I was with Sara and wouldn’t want to put her at risk. Life will catch them up them eventually I’m sure.
Today the sheet metal folder I ordered finally arrived:
..annoyingly I don’t have enough spare clamps to hold down the plate securely enough, so I’ll have to pick some up over the course of the week.
Hopefully by the weekend the jigsaw will have arrived and I can make something a bit more dashboard shaped.
Andy
Today the sheet metal folder I ordered finally arrived:
..annoyingly I don’t have enough spare clamps to hold down the plate securely enough, so I’ll have to pick some up over the course of the week.
Hopefully by the weekend the jigsaw will have arrived and I can make something a bit more dashboard shaped.
Andy