Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: Monty the rather rusty 2A - 37FG31

Post by AR4412 » Sun Feb 12, 2017 8:03 pm

I'm waiting for the weather to improve so that I can get out there and get the axles off and stripped, so I share your weather related frustrations mate.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sun Feb 12, 2017 8:34 pm

I do feel for you 'outdoor' gents. I rebuilt mine at the whims of the weather.

At the moment I'm waiting for a suitable day to crawl underneath and measure the propshaft UJ size. Maybe tomorrow!
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Feb 12, 2017 8:47 pm

What do you need to know Chris? I've got a prop shaft easily accessible.

On the 'outdoors' front - I've got plenty of inside space to use, but the lighting is makeshift, the heating is non existent, and during the daylight hours when I wanted the sunlight to flood in so left the doors open, the snow was coming in horizontally and dusting my disappointed face with nature's frosty pain.

chipbury
Master Baker
Posts: 1411
Joined: Sun Oct 02, 2011 3:26 pm
Location: Bath

Re: Monty the rather rusty 2A - 37FG31

Post by chipbury » Sun Feb 12, 2017 8:55 pm

I need to find out if I have 82mm or 75mm UJ's in my propshafts - it would be lovely if you could tell me!
2A - 39 FG 70

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Sun Feb 12, 2017 8:58 pm

Ah. Sadly the crystal ball is still in storage two years after the move to Bedfordshire.

User avatar
GAZ_XB9R
Pastry Chef
Posts: 550
Joined: Mon Sep 29, 2014 6:53 pm
Location: Stonehaven, Scotland

Re: Monty the rather rusty 2A - 37FG31

Post by GAZ_XB9R » Sun Feb 12, 2017 9:40 pm

While you're at it measure mine too as they were knocking last time I had her up on a ram and I never got round to ordering some lol

I'm in the same boat. I feel your pain re the weather.

I had to dig the washer pump out of my BMW (inside the inner plastic wing) yesterday in the horizontal snow. Got it out. Unblocked and working again but couldn't feel my fingers to put it all back together. Had to leave it till this morning. At least the snow had stopped.

I envy everyone's time on their projects though as I get tied up with rug rats all the time.

Gaz
Cheers,
Gaz


First old Landie a 1970 Lightweight.

Now a work in progress.

61 FK 61 (Spent her time in NI)

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Mon Feb 13, 2017 6:08 am

Looking good Andy. Cracking progress there. I doubt some scratches in the mating faces will not matter once filled with marmite but then again it doesn't look like you are going for the in service look.
Keep it up.
Mac
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Feb 14, 2017 6:14 pm

Thanks Mac, I'm getting less inclined to be picky as time goes on :D

Well, tonight's brief update is that VICTORY IS MINE! One brand new cold chisel later and some well placed wellying saw both races free in minutes.
IMG_1126.JPG
IMG_1126.JPG (105.09 KiB) Viewed 1951 times
Hopefully this bodes well for fitting the new ones tomorrow evening.

All the best,

Andy

Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Tue Feb 14, 2017 6:44 pm

Yay, Well done Andy. Have a scotch. Put new races in yet? If so have some more.
What better way is there to spend Valentines Day evening?
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Tue Feb 14, 2017 7:20 pm

Sadly Mac, Mrs S has decreed this evening is for dinner and not booze.

What the @£"! Is that about?!

On the good news front - I have tomorrow and Thursday evenings to do work in peace as Sara is out tomorrow and off to her Mum's with the kids on Thursday.

Boom.

Post Reply