Monty the rather rusty 2A - 37FG31

Tell us about any of your Land Rover related projects here.
Macvfork
Pastry Chef
Posts: 717
Joined: Sun Aug 17, 2014 3:31 pm
Location: Heathfield, sussex

Re: Monty the rather rusty 2A - 37FG31

Post by Macvfork » Fri Feb 10, 2017 8:27 am

Very smart Andy. But wonder if you may be have got carried away on paint fumes or should I be painting inside the hub as well? It is not seen but then again we paint round pictures at home! :lol:

Still trying to find that hoover pipe like thing. Please tell.
Mac
85-KB-13 S3 lwt. Nato green GS ex 1LI, 40 RM
03-GF-35 S3 air portable DIS 1/75 ex NIM (V), 41 Cdo RM, RE, RCT, AMB SQN
300Tdi Disco 1 com for Rtv trials.

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Feb 10, 2017 10:10 am

Its just a bit of over-spray Mac - i'll white spirit it off once the race comes out. We solve the pictures problem by not putting any up 8-)

Come to think of it - can anyone remind me what this bit is...
IMG_1021.JPG
IMG_1021.JPG (120.21 KiB) Viewed 1877 times

Landie68
Master Baker
Posts: 1564
Joined: Sat Dec 03, 2016 6:31 pm
Location: Herefordshire

Re: Monty the rather rusty 2A - 37FG31

Post by Landie68 » Fri Feb 10, 2017 12:09 pm

Yep, its a Land Rover part :D X!
Regards
Richard

Discovery Sport
15FM83 ex 15 Para and 7 PO's

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Fri Feb 10, 2017 3:38 pm

andrewjsimpson1977 wrote: ↑
Fri Feb 10, 2017 10:10 am

Come to think of it - can anyone remind me what this bit is...
Isn't it the guard which fits over the top of the steering relay and which is bolted t the offside of the front grille panel, beside the horn mounting?

Fred

User avatar
landymad
Admin
Posts: 3979
Joined: Wed Jan 13, 2010 8:42 am
Location: Doncaster

Re: Monty the rather rusty 2A - 37FG31

Post by landymad » Fri Feb 10, 2017 4:00 pm

Landie68 wrote: ↑
Fri Feb 10, 2017 12:09 pm
Yep, its a Land Rover part :D X!
:lol: :lol:
Rob.
Chairman and Webmaster.

1972 Series III Lightweight GS 200Tdi
----------------------------------------------------------

landyseb

Re: Monty the rather rusty 2A - 37FG31

Post by landyseb » Fri Feb 10, 2017 4:17 pm

Hi Andy, The part is the brake light switch guard and it bolts to the underside of the brake pedal mounting point thus protecting the switch from breakage.

Cheers Adam

andrewjsimpson1977
Cake Guru
Posts: 3613
Joined: Tue Aug 11, 2015 3:31 pm
Location: Befordshire

Re: Monty the rather rusty 2A - 37FG31

Post by andrewjsimpson1977 » Fri Feb 10, 2017 6:49 pm

Thanks Adam - I'll try not to forget that by the time it comes to fit it!

So tonight's instalment is all about the damaged hub. One of the rear hubs I am waiting to fit to the rear axle (hopefully tomorrow) had quite extensive gouges to the face that mates to the drive member. This mean that the gasket would stand no chance of holding in the oil, and in fact when I bought the vehicle it had clear evidence of an oil leak on that side.

Also some buffoon, who may or may not have been me dropped a spinning grinder on it, breaking the grinder and further damaging the hub. Grr.

Enter cunning plan.

I decided to blob some weld onto each of the gouges in the face of the hub, then file, sand and grind (ok scratch that I don't have a grinder anymore) until the face was serviceable again.

Here's stage one:
IMG_1031.JPG
IMG_1031.JPG (74.08 KiB) Viewed 1939 times
Obviously stage two involved a lot more effort. I hand-filed the weld blobs for two hours before I got fed up, and after some rummaging found one of those rubber sanding attachments for my drill, together with a really coarse, evil looking sanding pad. Bingo.
IMG_1032.JPG
IMG_1032.JPG (73.87 KiB) Viewed 1939 times
Admittedly there is still a need for stage three: fill the two or three holes (there were originally twelve) remaining after sanding, and flap wheel the inside edge where weld has dribbled into the casing slightly. There will also be some final polishing needed over the whole face to make it perfect.

Still, I'm really pleased with the result, and I reckon it would already seal with the appropriate gasket and sealant.

I also did a bit more tidying, finding the massive socket set me and my dad bought to do up a mini in the nineties. Good times. Amazing what sentimental value can be found in a tool box.

What else have I done? Oh yes, I found about 400 spanners I forgot I owned, and dipped the rear diff casing in the acid bath ready for painting on Sunday. I also dipped one of the bulkhead brackets, as it occurred to me it's an easy part to get fitted, and one thing leads to another in that respect.

See you tomorrow for (hopefully) an axle rebuild. Finger crossed it won't be snowing by then..

All the best,

Andy

User avatar
removeduser185
Cake Guru
Posts: 3531
Joined: Thu Jun 18, 2015 10:37 pm

Re: Monty the rather rusty 2A - 37FG31

Post by removeduser185 » Fri Feb 10, 2017 6:59 pm

landyseb wrote: ↑
Fri Feb 10, 2017 4:17 pm
Hi Andy, The part is the brake light switch guard and it bolts to the underside of the brake pedal mounting point thus protecting the switch from breakage.

Cheers Adam
Still think its the guard over the steering relay... I have nothing like that on my pedal box and can't see anything in the IPC, or the Repair Operations Manual (ROM). But there is a "horn protector plate" on page 76-2 of the ROM, not identical, but it's for a different radiator grille panel and I do remember removing something similar during my strip-down.

Fred

landyseb

Re: Monty the rather rusty 2A - 37FG31

Post by landyseb » Fri Feb 10, 2017 11:07 pm

Fred, the one you are talking about is a flatter plate with a 90 degree bend approx 1 inch deep along it incorporating 2 captive 7/16 bolts and is bolted to the radiator panel on some models and to the battery box on others. This is much larger than andys mystery part.

Cheers Adam

landyseb

Re: Monty the rather rusty 2A - 37FG31

Post by landyseb » Fri Feb 10, 2017 11:10 pm

Ps Fred if you have got a series 3 lwt or servo brakes on a series 2a (a modification using a series 3 pedal box and servo) you will not have this part on yours as the switch is under the bonnet on those types.

Cheers Adam

Post Reply