Rubber parts/door seals

If you have encountered or solved a problem post here
Post Reply
Munga
Posts: 63
Joined: Tue Jul 28, 2015 7:25 pm

Rubber parts/door seals

Post by Munga » Mon Nov 02, 2015 8:02 pm

As LWT door seals are pricey,has anyone used a similar profile rubber extrusion?

http://www.woolies-trim.co.uk/c-322-rub ... usion.aspx

There must be many that are close enough from different suppliers?

Munga

47 HG 77
Posts: 29
Joined: Mon Feb 03, 2014 4:15 pm

Re: Rubber parts/door seals

Post by 47 HG 77 » Fri Nov 20, 2015 11:21 am

Yes used them in the past, the seal is softer than the MOD type but still good quality and also there is no steel inserted so you have to use hacksaw blades and the like to add strength when the rivet goes in

Matt

User avatar
longlegslandyman
Posts: 314
Joined: Sun Nov 15, 2015 11:54 am
Location: Herne Bay Kent

Re: Rubber parts/door seals

Post by longlegslandyman » Fri Nov 20, 2015 4:14 pm

Never used those guys but i did get some from paddocks or craddocks cant remember with out looking it up ,but i found theres to thick nice and soft but just to thick a profile.

Post Reply