New Lid

Any information on all other kit
User avatar
a01470258
Posts: 273
Joined: Thu Jul 28, 2011 11:05 pm
Location: West Mids

New Lid

Post by a01470258 » Mon Aug 06, 2012 10:33 pm

Have found a nice Mk7 at a good price, not as good as.those AC900s at Beltring mind.
Its a joy to put on your bonce, especially with the comfort pads and lightweight along the lines of a GRP para lid.
Will add some pictures soon but cant post from my Phone for some reason?
1991 TUL WINTERISED FFR HARD TOP 12/24V 4X4 90 DIESEL Ex 42 CDO & 29 CDO RM 61KJ21
1994 TRUCK UTY MED (HS) HT W/VPK 12V SNATCH 2B 300TDI NON EGR. EX R.IRISH/ 1 MERCIAN / EX KRH / EX RIFLES 35KK20
1986 TRAILER 2WHL CARGO WIDE TRACK REBODIED 3/4 TON EX R.N. 57KC92

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: New Lid

Post by AR4412 » Tue Aug 07, 2012 12:05 am

Anything like mine?
SAM_0427.JPG
SAM_0427.JPG (20.34 KiB) Viewed 3036 times
SAM_0426.JPG
SAM_0426.JPG (31.99 KiB) Viewed 3036 times
I agree, it's a lot comfier than the Mk6/Mk6A.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
a01470258
Posts: 273
Joined: Thu Jul 28, 2011 11:05 pm
Location: West Mids

Re: New Lid

Post by a01470258 » Tue Aug 07, 2012 12:44 am

Yup pretty much just like the first photo currently, then something more like the second in a week or two hopefully.
:D
1991 TUL WINTERISED FFR HARD TOP 12/24V 4X4 90 DIESEL Ex 42 CDO & 29 CDO RM 61KJ21
1994 TRUCK UTY MED (HS) HT W/VPK 12V SNATCH 2B 300TDI NON EGR. EX R.IRISH/ 1 MERCIAN / EX KRH / EX RIFLES 35KK20
1986 TRAILER 2WHL CARGO WIDE TRACK REBODIED 3/4 TON EX R.N. 57KC92

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: New Lid

Post by AR4412 » Tue Aug 07, 2012 12:55 am

a01470258 wrote:Yup pretty much just like the first photo currently, then something more like the second in a week or two hopefully.
:D
Going for the airborne 'Alley' look then. :P I'm with 16 Bde even though I'm a 'Hat', so I had to join them with the scrim cover as I've no chance of beating them. :lol:

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
a01470258
Posts: 273
Joined: Thu Jul 28, 2011 11:05 pm
Location: West Mids

Re: New Lid

Post by a01470258 » Tue Aug 07, 2012 1:08 pm

Yup tis.that a mk6 or 7 cover you've used
1991 TUL WINTERISED FFR HARD TOP 12/24V 4X4 90 DIESEL Ex 42 CDO & 29 CDO RM 61KJ21
1994 TRUCK UTY MED (HS) HT W/VPK 12V SNATCH 2B 300TDI NON EGR. EX R.IRISH/ 1 MERCIAN / EX KRH / EX RIFLES 35KK20
1986 TRAILER 2WHL CARGO WIDE TRACK REBODIED 3/4 TON EX R.N. 57KC92

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: New Lid

Post by AR4412 » Tue Aug 07, 2012 10:41 pm

a01470258 wrote:Yup tis.that a mk6 or 7 cover you've used
Its a Mk6 cover, they haven't made one for the Mk7 yet, or if they have they've yet to issue them out. They fit okay unless you have a fat-head sized helmet where they tend to pull off at the front, especially if using an NVG harness.

A lot of guys, me included, tuck the excess inside and tape it down instead of tying it up. I used a cut up 12.00R20 inner tube, (from a DAF 4T) to hold the scrim on. The green canvas tape holding the cover on comes up to the height of the inner tube. (I'm sure you've probably seen helmets taped up like it somewhere before anyway.)

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
a01470258
Posts: 273
Joined: Thu Jul 28, 2011 11:05 pm
Location: West Mids

Re: New Lid

Post by a01470258 » Wed Aug 08, 2012 12:27 am

Yes seen most mk7s with covers wrapped on the lower 1/4 in green or tan fabric sniper tape.
Thought id heard somewhere that they'd banned ( in some units? ) the rubber innertube being used?
Due to burns and contamination in melting causing face an neck injurys in IED explosions.
Unpicking the stitching is part complete already on the mtp cover I have, so once ive sorted the work out on my 90, finishing that'll be next on the list.
1991 TUL WINTERISED FFR HARD TOP 12/24V 4X4 90 DIESEL Ex 42 CDO & 29 CDO RM 61KJ21
1994 TRUCK UTY MED (HS) HT W/VPK 12V SNATCH 2B 300TDI NON EGR. EX R.IRISH/ 1 MERCIAN / EX KRH / EX RIFLES 35KK20
1986 TRAILER 2WHL CARGO WIDE TRACK REBODIED 3/4 TON EX R.N. 57KC92

User avatar
AR4412
Maître Pâtissier
Posts: 8938
Joined: Thu Sep 22, 2011 9:31 am
Location: Bedford

Re: New Lid

Post by AR4412 » Wed Aug 08, 2012 1:19 am

It does seem to depend from unit to unit what you are allowed to do to your helmet. In Afghan we tended to just use the tape and not the inner tube.That was more to do with a lack of inner tubes than anything else. Scrim net covering of the helmet is the law in our unit, being airborne and all that.

I think if your caught in an IED blast a bit of hot inner tube is the least of your problems. A bigger problem is the pouches on the front of your Osprey trying to remove your face for you. Most IED's injuries tend to be blast and frag as opposed to flash. They tried making troops stop placing the pouches, mini-flares, bayonets etc, on the front of the Mk3 Osprey when I was there in '07 so they didn't get blown upwards into the head, then they brought out the Mk4 Osprey for our tour in 2010 with more pouches than you can count and gave up on it.

Some units are anal and don't let you remove the elastic, or put scrim over your helmet as it ruins the camouflage properties of the MTP. I've seen other units since my tour with cam net cut-offs over their helmets. Looks like the bad old days of the Mk5 'tin pi##er' with its ghillie style cam cover. (Showing my age there!)

The elastics no good in Afghan anyway, you can never get the sand to stay tucked into it. :lol:

Have fun unpicking all the stitching, I made friends with a scapel blade when I did mine.

Regards,
For Those That Have Had To Fight for It, Life Has Truly A Flavour The Protected Will Never Know.

'First my weapon. Then my equipment. Then myself.'

Neil.

09FM98. 1973 Ex SIII FFR Now 3.5 V8 LWT Coiler.
55HG98. 1980 SIII FFR PARA RECCE. Ex 1, 2 and 3 PARA.
Td5 90 XS.

User avatar
landymad
Admin
Posts: 3979
Joined: Wed Jan 13, 2010 8:42 am
Location: Doncaster

Re: New Lid

Post by landymad » Wed Aug 08, 2012 4:54 pm

:mrgreen: :mrgreen: :mrgreen: I really want one of these but not paying the silly prices out there. :( one for the wish list at the mo I think.
Rob.
Chairman and Webmaster.

1972 Series III Lightweight GS 200Tdi
----------------------------------------------------------

User avatar
a01470258
Posts: 273
Joined: Thu Jul 28, 2011 11:05 pm
Location: West Mids

Re: New Lid

Post by a01470258 » Thu Aug 09, 2012 11:44 pm

If anyones getting one, make sure you get one with the comfort pads either side of the helmet, they can be seen in the picture with cut outs for the ears.
They are removable for wearing a PRR,a medium is good for upto about a 59 hat size.
Yes it seems theres no hard and fast rules as usual.
I think ill stick with the inner tube or a squaddie kit moulded band maybe probably going for a old style mk5 large net rather than the scrim scalf type.
The original opsreys before the Mk4 you really could'nt avoid putting anything on the front because the sides were just useless and any weight on them would pull the velcro off.
Really anything of weight had to go on the front, just the trouble is you cant get right down on your belt buckle.
On the MK4 with the waist cummerbund suppose you do have more of a chance of getting it spread out on your hips.
Attachments
DSC_0375.JPG
DSC_0375.JPG (353.38 KiB) Viewed 2984 times
1991 TUL WINTERISED FFR HARD TOP 12/24V 4X4 90 DIESEL Ex 42 CDO & 29 CDO RM 61KJ21
1994 TRUCK UTY MED (HS) HT W/VPK 12V SNATCH 2B 300TDI NON EGR. EX R.IRISH/ 1 MERCIAN / EX KRH / EX RIFLES 35KK20
1986 TRAILER 2WHL CARGO WIDE TRACK REBODIED 3/4 TON EX R.N. 57KC92

Post Reply